MS3114E8-4S Amphenol, MS3114E8-4S Datasheet - Page 51

• Manufacturer Part Number: MS3114E8-4S
• Description: Circular MIL / Spec Connectors 4P #20 SKT CONTACTS
• Manufacturer: Amphenol
• Series: MS Seriesr

Specifications of MS3114E8-4S

• Mil Type: MIL-DTL-26482 I
• Product Type: Connectors
• Contact Style: Socket (Female)
• Shell Style: Receptacle
• Shell Size: 8
• Number Of Contacts: 4
• Insert Arrangement: 8-4
• Mounting Style: Free Hanging
• Termination Style: Solder
• Contact Type: Socket
• Shell Plating: Chromate over Cadmium, Olive Drab
• Contact Plating: Gold
• Current Rating: 7.5 A
• Voltage Rating: 600 V
• Body Material: Aluminum Alloy
• Mounting Angle: Straight
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PT-CE, SP-CE
how to order
PT-CE, SP-CE
To more easily illustrate ordering procedure, part number
PT00CE-20-41PW (SR) is shown as follows:
See code below:
1. Connector Type
2. Shell Style
3. Service Class
4. Shell Size
5. Insert Arrangement
6. Contacts
7. Insert Rotation
8. “(SR)” designates strain relief clamp.
* This connector style is sometimes referred to as a cable connecting “plug”.
For ordering Miniature Breakaway PT-CE Crimp connectors see page 48.
PT
It does, however, mate with either a straight or 90 degree plug.
1
“PT” designates standard electrically conductive olive drab cadmium plated
bayonet lock connector with crimp contacts
“SP” designates electrically non-conductive, hard anodic coated bayonet
lock connector with large flange and mounting holes for back panel mount-
ing, and crimp contacts.
“00”
“01”
“02”
“06”
“07”
“08”
“CE”
“CP”
Both of the above are Amphenol
26482, Series 1 crimp contact connector and offer 7 lbs. contact retention
for size 20 contacts; 9 lbs for size 16 contacts.
“20” designates shell size. Shell sizes 6 through 24 available.
Refer to pages 4-11 for insert availability.
“20 – 41” designates insert arrangement. (The number following the
hyphen is the number only that is used in the part number).
“P” designates pin contacts.
“S” designates socket contacts.
Refer to page 7.
“W”, “X”, “Y”, “Z” designate that insert is rotated in its shell from the “nor-
mal” position. No letter required for normal (no rotation) position.
Indicate optional finishes as follows:
(003)
(005)
(014)
(023)
(024)
(025)
(027)
(424)
(466)
(470)
(476)
00
2
designates wall mounting receptacle
designates cable connecting receptacle*
designates box mounting receptacle
designates straight plug
designates jam nut receptacle
designates 90° plug
designates environmental crimp
designates potted type crimp
olive drab cadmium plate (standard on “PT”)
anodic coating - Alumilite
olive drab cadmium plate over nickel
electroless nickel
olive drab zinc cobalt plating
non-conductive black zinc cobalt plating
conductive black zinc cobalt plating
electroless nickel finish with strain relief
olive drab zinc cobalt plating with strain relief
non-conductive black zinc cobalt plating with strain relief
conductive black zinc cobalt with strain relief
CE – 20 – 41
3
4
5
P
6
®
®
(standard on “SP”)
proprietary versions of the MIL-C-
W
7
(SR)
8
49