HIF3BA-30PD-2.54R-MC Hirose Electric Co Ltd, HIF3BA-30PD-2.54R-MC Datasheet - Page 20

• Manufacturer Part Number: HIF3BA-30PD-2.54R-MC
• Description: Headers & Wire Housings 30P IDC RIBBON CABLE IN-LINE PLUG
• Manufacturer: Hirose Electric Co Ltd
• Series: HIF3B Seriesr

Specifications of HIF3BA-30PD-2.54R-MC

• Product Type: Headers - Shrouded
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B34
HIF3B Series●Ribbon Cable connector Compliant with MIL Standard
BSocket Side (Crimping) Assembling Procedures
(1) As shown in Figure 1, peel the applicable cable (AWG#20 to #26) jacket, and connect it using crimping jig HIF3-TA2022HC,
(2) After connection as shown Figure 2, check the contact direction, and insert the contact as shown Figures 3 and 4. Slightly pull
Note1 : For handling procedures for special crimping tools, refer to the "Handling Instruction Manual".
Note2 : Wire strip length: Refer to crimp condition sheet.
HIF3-TA2226HC, or HIF3-TA2426HC. In this case, insert the cable so as to hit the contact cable stripper position as shown
Figure 2.
the cable, and check whether the contact lance position is firmly fixed to the insulation case, as shown in the area (A).
Wire strip length
Figure 1
Figure 3
Figure 2
Figure 4