2891013 Phoenix Contact, 2891013 Datasheet - Page 4

• Manufacturer Part Number: 2891013
• Description: Telecom & Ethernet Connectors FL PSE 2TX
• Manufacturer: Phoenix Contact

Specifications of 2891013

• Product: Telecom & Ethernet Connectors
• Usoc Codes: RJ45
• Number Of Ports: 2
• Gender: Female
• Current Rating: 100 mA
• Voltage Rating: 18.5 VDC to 30.5 VDC
• Connection Type: 8-pos. RJ45 socket at the device
• Current, Consumption: 100 mA
• Dimensions: 45 W × 99 H × 112 D mm
• Temperature, Operating, Range: 0 to 55 °C
• Transmission Speed: 10/100 Mbps
• Voltage, Supply: 24 VDC
• Weight: 320 g
• Certificates/approvals: CUL, UL, CUL-EX LIS, UL-EX LIS
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Installation and Mounting/Removal
Install the PoE module on a clean DIN rail in accordance with EN 60715. Only use corrosion-free DIN rails to prevent
contact resistance. In order to prevent the module from slipping on the rail, end brackets can be mounted on both sides of
the module.
Mounting
1
2
3
Removal
1
2
3
Terminal Assignment and Grounding
Connect the DIN rail to protective earth ground using a grounding terminal block.
The modules are grounded when they are snapped onto the DIN rail. Connect protective earth ground with low impedance.
Connection of the Supply Voltage
Figure 1
Diagnostic and Status Indicators
7242_en_00
Des.
US
Place the module onto the DIN rail from above. The upper holding keyway must be hooked onto the top edge of the
DIN rail.
Push the module from the front towards the mounting surface.
Once the module has been snapped on properly, check that it is fixed securely on the DIN rail.
Pull the locking latch down using a screwdriver, needle-nose pliers or similar.
Pull the bottom edge of the module away from the mounting surface.
Pull the module diagonally upwards away from the DIN rail.
Color
Green
Green
Warning
The FL PSE 2TX module is designed exclusively for SELV operation in accordance with
IEC 60950 / EN 60950/VDE 0805.
Terminal assignment
1
Meaning
Supply voltage
For each PoE port - PoE detection
2
3
4
5
US
6
7
8
Terminal Meaning
5 - 8
1
2
3
4
Supply voltage +US1 (+24 V DC)
GND US1
Supply voltage +US2 (+24 V DC)
GND US2
Functional earth ground (optional)
PHOENIX CONTACT
FL PSE 2TX
4