20-101-0497 Rabbit Semiconductor, 20-101-0497 Datasheet - Page 17

• Manufacturer Part Number: 20-101-0497
• Description: MODULE OP6810 W/O ETH/MEM EXPANS
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0497

• Module/board Type: Single Board Computer Module
• Product: Prototyping Accessories
• Processor Type: Rabbit 2000
• Sram: 128 KB
• Flash: 256 KB
• Timers: 8 bit, 10 bit
• Number Of I/os: 24
• Operating Voltage: 9 V to 36 V
• Power Consumption: 1.5 W
• Board Size: 111 mm x 91 mm x 33 mm
• For Use With/related Products: OP6810
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-101-497; 20-101-497

2.7 PONG.C
You are now ready to test your programming connections by running a sample program.
Find the file
open it with the
then run it by selecting
play a small square bouncing around in a box.
This program shows that the CPU is working. The sample program described in
Section 5.2.3, “Run the PINGME.C Demo,” tests the TCP/IP portion of the board (if you
have the OP6800 model—the OP6810 does not have an Ethernet capability).
2.8 Where Do I Go From Here?
If there are any problems at this point:
• Use the Dynamic C
• Check the Rabbit Technical Bulletin Board and forums at
• Use the Technical Support
If the sample program ran fine, you are now ready to go on to explore other OP6800 fea-
tures and develop your own applications.
The following sample programs illustrate the features and operation of the OP6800.
These sample programs can be used as templates for applications you may wish to
develop.
Chapter 3, “Subsystems,” provides a description of the OP6800’s features, Chapter 4,
“Software,” describes the Dynamic C software libraries and describes the sample pro-
grams, and Chapter 5, “Using the TCP/IP Features,” explains the TCP/IP features and
describes some sample programs.
User’s Manual
and at www.rabbit.com/forums/.
NOTE: If you purchased your OP6800 through a distributor or Rabbit partner, contact
(
SAMPLES\LCD_KEYPAD\122x32_1x7
the distributor or partner first for technical support.
KEYBASIC.C
KEYMENU.C
SCROLLING.C
TEXT.C
PONG.C
File
menu (if it is not still open), compile it using the
, which is in the Dynamic C
Help
Run
OP6800
in the
menu to get further assistance with Dynamic C.
e-mail form at
Run
menu. The
www.rabbit.com/support/
)
SAMPLES
(
SAMPLES\OP6800\DEMO_BD
STDIO
KEYPAD.C
SWITCHES.C
Demonstration Board
window will open and will dis-
folder. To run the program,
www.rabbit.com/support/bb/
.
Compile
menu, and
)
13