PIC10F200-I/P Microchip Technology, PIC10F200-I/P Datasheet

no-image

PIC10F200-I/P

Manufacturer Part Number
PIC10F200-I/P
Description
IC PIC MCU FLASH 256X12 8DIP
Manufacturer
Microchip Technology
Series
PIC® 10Fr

Specifications of PIC10F200-I/P

Program Memory Type
FLASH
Program Memory Size
384B (256 x 12)
Package / Case
8-DIP (0.300", 7.62mm)
Core Processor
PIC
Core Size
8-Bit
Speed
4MHz
Peripherals
POR, WDT
Number Of I /o
3
Ram Size
16 x 8
Voltage - Supply (vcc/vdd)
2 V ~ 5.5 V
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
PIC10F
Core
PIC
Data Bus Width
8 bit
Data Ram Size
16 B
Interface Type
USB
Maximum Clock Frequency
4 MHz
Number Of Programmable I/os
4
Number Of Timers
1
Operating Supply Voltage
2 V to 5.5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
Through Hole
3rd Party Development Tools
52715-96, 52716-328, 52717-734
Development Tools By Supplier
PG164130, DV164035, DV244005, DV164005, PG164120
Minimum Operating Temperature
- 40 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
AC162059 - HEADER INTRFC MPLAB ICD2 8/14PINAC164037 - MODULE SKT 6L PROMATE II SOT23
Eeprom Size
-
Data Converters
-
Connectivity
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC10F200-I/P
Manufacturer:
MICROCHIP
Quantity:
1 200
Part Number:
PIC10F200-I/P
Manufacturer:
MICROCHIP/微芯
Quantity:
20 000
The PIC10F200/202/204/206 parts you have received
conform functionally to the Device Data Sheet
(DS41239D), except for the anomalies described
below.
Microchip intends to address all issues listed here in
future
silicon. Where noted, issues apply to listed revision
only.
1. Module: Port Pins
2. Module: Comparator
© 2007 Microchip Technology Inc.
PIC10F200/202/204/206 Rev. A Silicon/Data Sheet Errata
On the PIC10F204/206 silicon, Rev. A0, the data
direction control latch for port pin GP2 is overrid-
den when the comparator output is used internally.
This applies when the following bit configuration is
used:
Work around
This issue is fixed in Rev. A1 and later.
On the PIC10F204/206 silicon, Rev. A0, the inter-
nal voltage reference is disabled when a SLEEP
instruction is executed.
Work around
Do not issue a SLEEP instruction when using the
internal 0.6V voltage reference. This issue is fixed
in Rev. A1 and later.
revisions
T0CS = 1
CMPT0CS = 0
COUTEN = 1
of
the
OPTION<5>
CMCON0<4>
CMCON0<6>
PIC10F200/202/204/206
PIC10F200/202/204/206
3. Module: I
FIGURE 1:
I
DD
I
PD
On the PIC10F200/202/204/206 silicon, revisions
earlier than A3, the power-down base current may
remain higher than the specification for a short
time when entering Sleep.
The following graph illustrates the device current
upon entering Sleep:
The length of time between the device entering
Sleep mode and the device current reaching I
increases as both temperature and voltage
decrease.
Work around
This issue is fixed in Rev. A3 and later.
PD
Device enters
Sleep
, Power-Down Base current
Time
Device current
reaches I
DS80194G-page 1
PD
PD

Related parts for PIC10F200-I/P

PIC10F200-I/P Summary of contents

Page 1

... PIC10F200/202/204/206 Rev. A Silicon/Data Sheet Errata The PIC10F200/202/204/206 parts you have received conform functionally to the Device Data Sheet (DS41239D), except for the anomalies described below. Microchip intends to address all issues listed here in future revisions of the PIC10F200/202/204/206 silicon. Where noted, issues apply to listed revision only ...

Page 2

... Re-locatable Code .config code 0xYYYY data data _CP_OFF & _WDT_ON & etc. __CONFIG data _CP_OFF & _WDT_ON & etc. TABLE 1: CONFIGURATION WORD ADDRESS Device PIC10F200 PIC10F202 PIC10F204 PIC10F206 Note 1: YYYY is the address of the Configuration Word for the part. DS80194G-page 2 YYYY 01FF 03FF ...

Page 3

... In the Device Data Sheet (DS41239D), the following clarifications and corrections should be noted. 1. Module: Special Features of the CPU Register 9-1: Configuration Word, bit 11-5 and bit 1-0 should be (Read as ‘1’) as shown in bold. REGISTER 9-1: CONFIGURATION WORD FOR PIC10F200/202/204/206 — — — — ...

Page 4

... PIC10F200/202/204/206 APPENDIX A: REVISION HISTORY Rev A Document (6/2004) First revision of this document. Rev B Document (6/2004) Added Module disabled in Sleep. REF Rev C Document (9/2004) Added Module 3, MPLAB IDE and the _CONFIG assembly directive. Rev D Document (6/2006) Added the following Modules to the “Clarifications/ Corrections to the Data Sheet” section: “ ...

Page 5

... PowerInfo, PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Smart Serial, SmartTel, Total Endurance, UNI/O, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 6

... Fax: 886-3-572-6459 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 © 2007 Microchip Technology Inc. EUROPE Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Tel: 33-1-69-53-63-20 ...

Related keywords