PS-31-300MM Omron, PS-31-300MM Datasheet - Page 2

• Manufacturer Part Number: PS-31-300MM
• Description: Sensor Hardware & Accessories ELECTRODE ASSRHS
• Manufacturer: Omron

Specifications of PS-31-300MM

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

■ PS-@S(R) Electrode Holder Accessories (Order Separately)
■ PS-31 Electrode Holder Accessories (Order Separately)
■ Accessories Required for Connecting the PS-@S(R) and Electrodes
Electrodes Shorter
Than 1 m
The following items are required
for each pole.
• 1 × F03-01 Electrode
• 1 × F03-03 Lock Nut
The Electrode can be cut
anywhere based on the control
level.
Note: 1. The spring washer comes with the lock nut.
Note: This Bushing is not waterproof.
Use this Cover for PS-series Electrode
Holders with Mounting Frames (upper
one in the following illustration), This
Cover can also be used when installing
the BF-series Electrode Holders
outdoors. Since this Cover is not
water-proof, water or dust may enter
through the wire hole (lower one below).
Applicable Electrode Holders:
BF-3, BF-4, BF-5, PS-3S(R), PS-4S(R),
PS-5S(R)
(Order Separately)
F03-31 Dust-proof Rubber Bushing
2. Refer to F03-
6 dia. (inner)
60
F03-11 Protective Cover
Electrode
120 dia.
75
http://www.ia.omron.com/
@
Material: Silicon rubber
for details on Electrodes, Connecting Nuts, Lock Nuts, and Separators.
Weight:
approx. 65g
Operating
temp.: −10°C
to 70°C
32 dia.
Electrode
Spring washer (See note 1.)
Lock nut
Used to clamp an Electrode Holder
with ease, as shown in the illustrations,
when the Electrode Holder is applied
to a tank without a coupling.
Squeeze the mounting frame into
the Holder as shown below.
Applicable Electrode Holders:
PS-3S(R), PS-4S(R), PS-5S
Four, M5 x 25
mounting
screws
10
F03-12 Spring Clamp
Electrode
112 dia.
96
Electrode Longer
Than 1 m
The following items are required for every
additional meter of electrode for each pole.
• 1 × F03-01 Electrode
• 1 × F03-02 Connecting Nut
• 2 × F03-03 Lock Nuts
Use F03-14 1P, 3P, and 5P Separators to
prevent the electrodes from touching each
another.
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Useful frame for burying in concrete. Cut
as required based on the concrete depth.
F03-13 Mounting Frame for installing in
100
Commonly used with
Mounting Frame
Mounting Frame
embedded into
concrete
80
60
115 dia.
72 dia.
82 dia.
96
concrete
PS-@S(R)/-31
Electrode
70
Lock nut
Electrode
Separator (1-pole)
Spring washer
Connecting nut
2