SR2511F-0205-32K0A-S8-N-W-186 Alpha (Taiwan), SR2511F-0205-32K0A-S8-N-W-186 Datasheet - Page 4

• Manufacturer Part Number: SR2511F-0205-32K0A-S8-N-W-186
• Description: Rotary Switches 2POLE 5POSITION NS 32mm SHAFT 19mm BUSH
• Manufacturer: Alpha (Taiwan)
• Type: Rotary Switchr

Specifications of SR2511F-0205-32K0A-S8-N-W-186

• Number Of Positions: 5
• Number Of Poles Per Deck: 2
• Number Of Decks: 1
• Index Angle: 30 deg
• Contact Style: Non Shorting
• Contact Form: DP
• Mounting Type: Through Hole
• Voltage Rating: 125 Volts
• Current Rating: 0.3 Amp
• Contact Rating: 0.3 Amp
• Termination Style: Wire
• Voltage Rating Ac: 125 Volts
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Item
3.1 Operating force
3.2 Control strength
3.3 Terminal strength
3.4 Control wobble
3.5 Soldering
3.6 Soldering heat
1. TEST CONDITIONS
2. OUTSIDE DIMENSION
3. MECHANICAL PERFORMANCE
resistance
Standard test conditions shall be 5-35
Should any doubt arise in judgment test shall be conducted at 20±2
Append drawing.
Test Condition
Operation temperature:-10
Storage temperature:-40
A static load of 1000gf-cm shall be
applied in the operating direction and
tensile direction of the unit for one
minute.
A static load of 1000gf-cm shall be
applied to the tip of the terminal in a
desired direction for one minute.
The number of tests shall be one per
terminal.
Shall be measured by applying a static
load of 100gf-cm to the tip of control
unit.
Temperature of solder
Duration of dipping
Flow soldering condition:
to be performed in
within
Manual soldering condition:
to be performed in
within
230±5℃
300±5℃
Specification
Rotary switch
℃
SR25XX
3±0.5
3±0.5
in temperature and 45
3±0.5
Page 2 of 4
230±5℃
℃
seconds
seconds Max
℃
seconds
~ +85
~ +70
℃
℃
-85% RH in humidity.
℃
DOC. No:
Date:
Author: 何建志
Approved: 王茂松
Specification
1.0±0.5kgf-cm
N/A
N/A
Less than 1 mm
More than 90％ of the dipped
part shall be covered by solder
No abnormalities shall be
observed in appearance and
operation shall be assured.
and 65±5% RH.
Rev. A