ATF16V8C-7PU Atmel, ATF16V8C-7PU Datasheet - Page 7

• Manufacturer Part Number: ATF16V8C-7PU
• Description: IC PLD 7NS 20DIP
• Manufacturer: Atmel

Specifications of ATF16V8C-7PU

• Programmable Type: EE PLD
• Number Of Macrocells: 8
• Voltage - Input: 5V
• Speed: 7ns
• Mounting Type: Through Hole
• Package / Case: 20-DIP (0.300", 7.62mm)
• Logic Family: ATF16V8C
• Maximum Operating Frequency: 125 MHz
• Number Of Programmable I/os: 8
• Delay Time: 7.5 ns
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: Through Hole
• Number Of Product Terms Per Macro: 8
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

0425H–PLD–3/11
11.
12.
Security fuse usage
A single fuse is provided to prevent unauthorized copying of the ATF16V8C fuse patterns. Once programmed, fuse verify
and preload are inhibited. However, the 64-bit user signature remains accessible.
The security fuse will be programmed last, as its effect is immediate.
Input and I/O pin-keeper circuits
The ATF16V8C contains internal input and I/O pin-keeper circuits. These circuits allow each ATF16V8C pin to hold its
previous value even when it is not being driven by an external source or by the device’s output buffer. This helps insure
that all logic array inputs are at known, valid logic levels. This reduces system power by preventing pins from floating to
indeterminate levels. By using pin-keeper circuits rather than pull-up resistors, there is no DC current required to hold the
pins in either logic state (high or low).
These pin-keeper circuits are implemented as weak feedback inverters, as shown in the Input Diagram below. These
keeper circuits can easily be overdriven by standard TTL- or CMOS-compatible drivers. The typical overdrive current
required is 40μA.
Figure 13.
Figure 14.
Input diagram
I/O diagram
Atmel ATF16V8C
7