ATF16V8BQL-15PC Atmel, ATF16V8BQL-15PC Datasheet - Page 7

IC PLD 8CELL LOW PWR 15NS 20DIP

ATF16V8BQL-15PC

Manufacturer Part Number
ATF16V8BQL-15PC
Description
IC PLD 8CELL LOW PWR 15NS 20DIP
Manufacturer
Atmel
Datasheet

Specifications of ATF16V8BQL-15PC

Programmable Type
EE PLD
Number Of Macrocells
8
Voltage - Input
5V
Speed
15ns
Mounting Type
Through Hole
Package / Case
20-DIP (0.300", 7.62mm)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ATF16V8BQL-15PC
Manufacturer:
THAILAND
Quantity:
6 218
Part Number:
ATF16V8BQL-15PC
Manufacturer:
ATMEL
Quantity:
2 876
4.6
4.7
5. Security Fuse Usage
0364J–PLD–7/05
Power-up Reset
Preload of Registered Outputs
The registers in the ATF16V8Bs are designed to reset during power-up. At a point delayed
slightly from V
tered output state will always be high on power-up.
This feature is critical for state machine initialization. However, due to the asynchronous nature
of reset and the uncertainty of how V
required:
Figure 4-1.
Table 4-2.
The ATF16V8B’s registers are provided with circuitry to allow loading of each register with either
a high or a low. This feature will simplify testing since any state can be forced into the registers
to control test sequencing. A JEDEC file with preload is generated when a source file with vec-
tors is compiled. Once downloaded, the JEDEC file preload sequence will be done automatically
by most of the approved programmers after the programming.
A single fuse is provided to prevent unauthorized copying of the ATF16V8B fuse patterns. Once
programmed, fuse verify and preload are inhibited. However, the 64-bit User Signature remains
accessible.
The security fuse should be programmed last, as its effect is immediate.
Parameter
t
V
1. The V
2. After reset occurs, all input and feedback setup times must be met before driving the
3. The clock must remain stable during t
PR
RST
clock pin high, and
CC
CC
rise must be monotonic,
Power-up Reset Waveforms
Power-up Reset Parameters
crossing V
Description
Power-up
Reset Time
Power-up
Reset Voltage
RST
, all registers will be reset to the low state. As a result, the regis-
CC
actually rises in the system, the following conditions are
PR
.
Typ
600
3.8
ATF16V8B/BQ/BQL
1,000
Max
4.5
Units
ns
V
7

Related parts for ATF16V8BQL-15PC