MY4ZN-AC110/120(S) Omron Automation, MY4ZN-AC110/120(S) Datasheet - Page 16

• Manufacturer Part Number: MY4ZN-AC110/120(S)
• Description: RELAY; E-MECH; POWER; 4PDT; RATED LOAD 3A; CRTL-V 110/120AC; VOL-RTG 250/125AC/DC
• Manufacturer: Omron Automation

Specifications of MY4ZN-AC110/120(S)

• Contact Form: 4PDT
• Current, Rating: 3 A
• Dielectric Rating: 2000 VAC
• Function: Power
• Mounting Type: Socket
• Power, Rating: 1250⁄150 VA⁄W
• Relay Type: Electro Mechanical
• Resistance, Coil: 4430 Ohms
• Standards: UL, CSA, VDE, LR, SEV, RoHS
• Temperature, Operating, Maximum: 70 °C
• Temperature, Operating, Minimum: -55 °C
• Termination: Plug-In
• Voltage, Control: 115 VAC
• Voltage, Rating: 250 VAC
• Lead Free Status / Rohs Status: RoHS Compliant part

SEV Listings (File No. 99.5 50902.01)
Note: 1. The rated values approved by each of the safety standards (eg., UL, CSA, VDE, and SEV) may be different from the performance char-
PYF-S Installation Notes
■ Tools
A flat-blade screwdriver should be used to mount the cables.
Applicable Screwdriver
● Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.)
Examples: FACOM AEF.2.5 × 75E
■ Applicable Wires
Applicable Wire Sizes
0.2 to 1.5 mm
Applicable Wire Type
Solid wires, stranded wires, flexible wires, or wires with ferules can
be used.
(See note 1.)
Conductor diameter d (mm) or length of sides a and b (mm) ≤ 1.9
274
● Flat-blade, Parallel-tip
● Flat-blade, Flared-tip
No. of poles
2
4
*Chamfering the tip of the driver improves insertion when used as an exclusive tool.
2. In the interest of product improvement, specifications are subject to change.
2.5 dia. (3.0 mm max.)
acteristics individually defined in this catalog.
VESSEL No. 9900-(-)2.5 × 75 (No. 9900-(-)3 × 100)
WAGO 210-119
WIHA 260/2.5 × 40
Wires with Ferules
2
<
General-purpose Relay
, AWG24 to AWG16
2.2 ≤ Diameter D (mm) ≤ 3.2 (3.5: see note 2.)
Cannot be used.
Coil ratings
6 to 240 VAC
6 to 125 VDC
(AEF. 3 × 75E)
(260/3 × 50)
MY
Contact ratings
10 A, 250 VAC
10 A, 30 VDC
5 A, 250 VAC
5 A, 30 VDC
Note: 1. If the overall diameter of the wire is less than 2.2 mm, do not
2. If the overall diameter of the wire is over 3.2 mm, it will be
insert the wire past the conductor. Refer to the following di-
agrams.
difficult to use double wiring.
Operations
10 x 10
100 x 10
MY4Z AC; 50 x 10
3
3
3