X363- .22-5-400 ASC Capacitors, X363- .22-5-400 Datasheet - Page 4

• Manufacturer Part Number: X363- .22-5-400
• Description: Capacitor; 0.22uF; Metallized Polypropy; Axial; 400VDC; +/-5%
• Manufacturer: ASC Capacitors

Specifications of X363- .22-5-400

• Brand/series: X363 Series
• Capacitance: 0.22 μF
• Diameter: 0.484 in.
• Diameter, Lead Wire: 20 AWG
• Insulation Resistance: 300000 Megohms
• Length: 1.032 in.
• Length, Lead: 1.625 in. (Min.)
• Material, Element: Polypropylene Metallized
• Temperature, Operating, Maximum: 105 °C
• Temperature, Operating, Minimum: -55 °C
• Termination: Axial
• Tolerance: ±5 %
• Voltage, Rating: 400⁄270 VDC⁄VAC
• Lead Free Status / Rohs Status: RoHS Compliant part

PHYSICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
ADDITIONAL INFORMATION
Phone: [phone]
Fax: [phone]
CONSTRUCTION: NON-INDUCTIVE WOUND METALLIZED POLYPROPYLENE.
CASE: FLAME RETARDANT TAPE WRAP CASE AND EPOXY FILL.
LEAD MATERIAL: AXIAL SOLDER COATED OR TINNED SOLID WIRE, AWG AS SPECIFIED IN TABLES.
DIMENSIONS: AS SPECIFIED IN TABLES.
CAPACITANCE: AS SPECIFIED IN TABLES ± REQUESTED TOLERANCE WHEN MEASURED AT OR
REFERRED TO 1000 ± 20 HZ AND 25 ± 5 °C.
TOLERANCE: ±1%, ±2%, ±5%, ±10%, AND ±20% AVAILABLE. OTHER TOLERANCES AVAILABLE UPON
REQUEST.
DISSIPATION FACTOR: SHALL NOT BE GREATER THAN 0.1% WHEN MEASURED AT OR REFERRED TO
1000 ± 20 HZ AND 25 ± 5 °C.
INSULATION RESISTANCE: SHALL BE GREATER THAN 300,000 M FOR CAPACITANCE VALUES 0.33 µF
AND LESS OR 100,000 M X µF FOR CAPACITANCE VALUES GREATER THAN 0.33µF WHEN MEASURED
AFTER 2 MINUTES ELECTRIFICATION AT 100VDC AND 25 ± 5 °C.
DIELECTRIC STRENGTH: 200% RATED VOLTAGE FOR 1 MINUTE THROUGH A LIMITING RESISTANCE
OF 100 OHMS/VOLT AT 25 ± 5 °C.
RATED VOLTAGE: 100VDC/67VAC, 200VDC/135VAC, AND 400VDC/270VAC AVAILABLE.
TEMPERATURE: -55 °C TO +105 °C AT FULL RATED VOLTAGE OPERATIONAL TEMPERATURE, +105 °C
MAX STORAGE TEMPERATURE.
ORDERING INFORMATION: ALL ASC CAPACITORS ARE ORDERED BY "FAMILY CAP-TOL-VOLT"
DESIGNATION. (I.E. TO ORDER AN X363 1.0µF, ±10%, 200VDC CAPACITOR, REQUEST PART NUMBER
"X363 1-10-200")
SEE ALSO: "GENERAL INFORMATION - POLYPROPYLENE CAPACITORS" DOCUMENT FOR ADDITIONAL
PHYSICAL, ELECTRICAL, AND PERFORMANCE CHARACTERISTICS NOT MENTIONED IN THIS FILE.
WARNING: INFORMATION ON THIS FILE IS SUBJECT TO CHANGE WITHOUT NOTICE AT ASC'S
DISCRETION.
METALLIZED POLYPROPYLENE
TAPE WRAP AND EPOXY FILL CASE
301 WEST O STREET
GENERAL SPECIFICATIONS
OGALLALA, NE 69153
e-mail: [e-mail]
web: www.ascapacitor.com
X363
LAST MODIFIED: 08/15/01
PAGE 4 OF 4