ARG20P-270AS SMC Corporation, ARG20P-270AS Datasheet - Page 3

• Manufacturer Part Number: ARG20P-270AS
• Description: Bracket Assy for ARG20 series; includes bracket and set nut
• Manufacturer: SMC Corporation

Series
Series
Options/Part No.
Note 1) Assembly of a bracket and set nuts
Note 2) Assembly of a bracket and 2 mounting screws
Note 3) Please consult with SMC regarding the set nuts for the AR50(K) and AR60(K).
Note 4) „ in part numbers for a round pressure gauge indicates a type of connection thread. No indication is necessary for R; however, indicate N for NPT. Please contact SMC
Note 5) Pressure gauge for general purpose
Note 6) Including one O-ring and 2 mounting screws. [
Note 7) Lead wire with connector (2 m), adapter, lock pin, O-ring (1 pc.), mounting screw (2 pcs.) are attached. [
1. Residual pressure disposal (outlet pressure removal) is not
1. When using the regulator with backflow function between a
348
Option
Bracket assembly
Set nut
Press-
ure
gauge
Digital
pressure
switch
Be sure to read before handling. Refer to front matters 42 and 43 for Safety Instructions and pages 287 to 291 for F.R.L.
Precautions.
possible for the AR20 to AR60 even though the inlet pressure
is exhausted. When the residual pressure disposal is per-
formed, use the regulator with a backflow function (AR20K to
AR60K).
solenoid valve and an actuator, check the pressure gauge peri-
odically. Sudden pressure fluctuations may shorten the durabil-
ity of the pressure gauge. A digital pressure gauge is recom-
mended for such situation or as deemed necessary.
Warning
Warning
regarding the connection thread NPT and pressure gauge supply for psi unit specifications.
Also, regarding how to order the digital pressure switch, please refer to page 388.
Round
type
Round
type (with
color zone)
Square
embedded
type
Note 4)
Note 4)
Note 6)
AR10 to AR60
AR20K to AR60K
0.02 to 0.2 MPa setting
0.02 to 0.2 MPa setting
0.02 to 0.2 MPa setting
NPN output: Wiring bottom entry
NPN output: Wiring top entry
PNP output: Wiring bottom entry
PNP output: Wiring top entry
Standard
Standard
Standard
Note 1)
Maintenance
Model
Selection
G27-10-R1
AR10P-270AS
AR10P-260S
G27-10-R1
AR10
—
—
—
—
—
Note 5)
Specific Product Precautions
]: Pressure gauge cover only
AR20P-270AS
AR20P-260S
AR20(K)
G36-10-„01-L
G36-2-„01-L
G36-10-„01
AR25P-270AS
AR25P-260S
G36-2-„01
AR25(K)
ISE35-N-25-MLA [ISE35-N-25-M (Switch body only)]
ISE35-R-25-MLA [ISE35-R-25-M (Switch body only)]
ISE35-N-65-MLA [ISE35-N-65-M (Switch body only)]
ISE35-R-65-MLA [ISE35-R-65-M (Switch body only)]
GC3-10AS [GC3P-010AS (Pressure gauge cover only)]
GC3-2AS [GC3P-010AS (Pressure gauge cover only)]
1. Set the regulator while verifying the displayed values of the in-
2. The pressure gauge included with regulators for 0.02 to 0.2
3. Do not use tools on the pressure regulator knob as this may
1. Be sure to unlock the knob before adjusting the pressure and
2. A knob cover is available to prevent careless operation of the
AR30P-270AS
AR30P-260S
AR30(K)
• Pull the pressure regulator knob to unlock. (You can visually
• Push the pressure regulator knob to lock. When the knob is
let and outlet pressure gauges. Turning the regulator knob ex-
cessively can cause damage to the internal parts.
MPa setting is for up to 0.2 MPa use only (except the AR10).
Exceeding 0.2 MPa of pressure can damage the gauge.
cause damage. It must be operated manually.
lock it after setting the pressure. Failure to follow this proce-
dure can cause damage to the knob and the outlet pressure
may fluctuate.
knob. Refer to page 389 for details.
verify this with the “orange mark” that appears in the gap.)
not easily locked, turn it left and right a little and then push it
(when the knob is locked, the “orange mark”, i.e., the gap will
disappear).
Warning
Caution
]: Switch body only
AR40(K)
Mounting and Adjustment
AR40P-270AS
AR40P-260S
AR40(K)-06
G46-10-„02-L
G46-2-„02-L
G46-10-„02
G46-2-„02
Orange mark
AR50(K)
Note 7)
Note 7)
Note 7)
Note 7)
—
AR50P-270AS
Note 3)
AR60(K)
—
Note 2)
Note 3)