GPM80-24 SL Power ( Ault / Condor ), GPM80-24 Datasheet

GPM80-24

Manufacturer Part Number

GPM80-24

Description

Power Supply; 80 W; Single; 24 V; 3.4 A (Max.); 85 to 264 VAC; 2.3 A (Max.);

Manufacturer

SL Power ( Ault / Condor )

Type

Medicalr

Datasheet

1.GPC80PG.pdf (2 pages)

Specifications of GPM80-24

Brand/series

GPM80 Series

Configuration

Open-Frame

Current, Input

2.3 A (Max.)

Current, Inrush

Inrush at 240 Vac under cold start conditions will not exceed 60 A.

Current, Leakage

35 μA @ 254 VAC

Current, Output

3.4 A (Max.)

Dimensions

7 in. L x 4.26 in. D x 1.86 in. (Max.) H

Hold Time

20 ms minimum from loss of ac input at full load, nominal line (115 Vac).

Mounting Type

Panel

Noise, Output

0.5% rms, 1% pk-pk, 20 MHz bandwidth, differential Mode

Number Of Outputs

Operation

Switching

Output

24 VDC @ 3.4 A

Output Type

Single

Overvoltage Protection

124% ± 12% typical.

Power Rating

80 W

Power, Output

80 W

Primary Type

AC-DC

Regulation, Total

Special Features

Remote Sense

Standards

UL Listed, CSA Certified, CE Marked

Voltage, Input

85 to 264 VAC

Voltage, Output

24 VDC

Current page: 1 of 2
Download datasheet (329Kb)

• Wide-range ac input 85-264 Vac

• 2-year warranty

• Conducted EMI exceeds FCC Class B and CISPR 22

• Commercial Approved to UL1950, IEC950, EN60950 and

• Medical Approved to UL2601-1, IEC601-1 and CSA22.2

• Complies with EN61000-3-2 Class A

• RoHS Compliant Model Available (G suffix)

SPECIFICATIONS

Ac Input

85-264 Vac, 47-63 Hz single phase.

Input Current

Maximum input current at 120 Vac, 60 Hz with full rated output load: 2.3 A

Hold-Up Time

20 ms minimum from loss of ac input at full load, nominal line (115 Vac).

Output Power

80 W continuous, 110 W with air flow. Peak ratings are for 60 s maximum

duration, 10% duty cycle. During peak load condition, output regulation may

exceed total regulation limits.

Overload Protection

Fully protected against short circuit and output overload. Short circuit protec-

tion is cycling type power limit on outputs 1 & 2; foldback type on outputs 3

& 4. Recovery after fault is automatic. Factory set to begin power limiting at

120 W. See output ratings chart for additional notes or conditions.

Overvoltage Protection

Main outputs: 124% ± 12% typical.

Efficiency

70% at full rated load, nominal input voltage, depending on model and load

distribution.

Input Protection

Internal ac fuse provided. Designed to blow only if a catastrophic failure oc-

curs in the unit.

Inrush Current

Inrush is limited by internal thermistors. Inrush at 240 Vac under cold start

conditions will not exceed 34 A.

Temperature Coefficient

0.03%/°C typical on all outputs.

Environmental

Designed for 0 to 50°C operation at full rated output power; derate output

current and total output power by 2.5% per °C above 50°C. See Environmen-

tal and Packaging Specifications on next page.

Power Fail (optional)

TTL- or CMOS-compatible output goes low (< 0.5 V) 5 ms before output

voltage drops more than 4% below nominal voltage upon loss of ac power.

The signal is factory set to trip on 84 to 94 Vac brown-out depending upon

incoming line impedance and distortion. Other settings are available to the

user through adjustment of built-in potentiometer (consult factory for as-

sistance). For Power fail option, add -PF after model number.

Class B (Commercial models) and CISPR 11 Class B

(Medical models)

CSA22.2-234 L3

No. 601.1

All specifications are typical at nominal input, full load at 25

PERFORMANCE MEDICAL SWITCHERS

FEATURES:

80 Watt Global Single and Multiple Output Performance Switchers

GPC80 Commercial/GPM80 Medical

C unless otherwise stated

Output Noise

0.5% rms, 1% pk-pk, 20 MHz bandwidth, differential mode. Measured with noise

probe directly across output terminals of the power supply.

Transient Response

Main output—500 μs typical response time for return to within 0.5% of final value

for a 50% load step change. ∆i/∆t<0.2 A/μs. Maximum voltage deviation is 3.5%.

Startup/shutdown overshoot less than 3%.

Remote Sense

Provided as a standard feature on single-output models.

Voltage Adjustment

Built-in potentiometer adjusts voltage ±5% on outputs 1 & 2.

EMI/EMC Compliance

All models include built-in EMI filtering to meet the following emissions

requirements:

EMI SPECIFICATIONS

Conducted Emissions GPC80

Conducted Emissions GPM80

Static Discharge

RF Field Susceptibility

Fast Transients/Bursts

Surge Susceptibility

Line Frequency Harmonics

Commercial Leakage Current

0.7 mA 254 Vac @ 60 Hz input.

Commercial Safety

Approved to UL1950, CSA22.2 No. 234 Level 3, IEC950 and EN60950. UL file

#E135803 commercial; CSA #LR46516 all. The output(s) are intended for safety

earthed Signal Output and Intermediate Circuits only. All dc outputs are SELV

under normal and single fault conditions.

Medical Leakage Current

35 μA 254 Vac @ 60 Hz input.

Medical Commercial Safety

Approved to UL2601-1, CSA-C22.2 No. 601.1 Level 3 and IEC601.1. UL file E116994;

CSA #LR46516. The output(s) are intended for safety earthed Signal Output and

Intermediate Circuits only. The output(s) are not acceptable for patient connection

without additional isolation. All dc outputs are SELV under normal and

single fault conditions.

COMPLIANCE LEVEL

EN55022 Class B; FCC Class B

EN55011Class B; FCC Class B

EN61000-4-2, 6 kV contact, 8 kV air

EN61000-4-3, 3 V/meter

EN61000-4-4, 2 kV, 5 kHz

EN61000-4-5, 1 kV diff., 2 kV com.

EN61000-3-2 Class A

Related parts for GPM80-24

GPM80-24 Summary of contents

Page 1

... Built-in potentiometer adjusts voltage ±5% on outputs 1 & 2. EMI/EMC Compliance All models include built-in EMI filtering to meet the following emissions requirements: EMI SPECIFICATIONS Conducted Emissions GPC80 Conducted Emissions GPM80 Static Discharge RF Field Susceptibility Fast Transients/Bursts Surge Susceptibility Line Frequency Harmonics Commercial Leakage Current ...

Page 2

... GPM80-5 G GPC80-12 GPM80-12 G GPC80-15 GPM80-15 G GPC80-24 GPM80-24 G GPC80-28 GPM80-28 G GPC80-48 GPM80- Add “G” suffix to part number for RoHS compliant model. Contact factory for availability. A. Total regulation is defined as the maximum deviation from the nominal voltage for all steady-state conditions of initial voltage setting, input line voltage and output load. ...

Related keywords

GPM80-24 datasheet
GPM80-24 data sheet
GPM80-24 pdf datasheet
GPM80-24 component
GPM80-24 part
GPM80-24 distributor
GPM80-24 RoHS
GPM80-24 datasheet download