PP624 Pico, PP624 Datasheet - Page 2

• Manufacturer Part Number: PP624
• Description: USB TC-08 Single-Channel Terminal Board
• Manufacturer: Pico
• Type: Terminal Boardr

USB TC-08 Single-Channel Terminal Board User’s Guide
1
equipment and personal injury.
DO NOT do not connect the terminal board to any voltage source exceeding the
maximum input range printed on the board.
DO NOT connect the terminal board to a mains (line voltage) electrical supply. The
high voltage will damage or destroy the equipment and may cause serious or fatal
injury.
2
2.1
The USB TC-08 Single-Channel Terminal Board is an accessory for the Pico
Technology USB TC-08 8-Channel Thermocouple Data Logger. The screw terminals
allow wires to be attached to the data logger without soldering and enable the USB
TC-08 to measure voltages from 0 to + 5 V or 4-20 mA loop currents.
The terminal board is designed for use with the USB TC-08 and is not guaranteed to
work with other thermocouple data loggers.
2.2
2.3
2
Dimensions
Weight
Terminal wire size
Name
4-20/5V
500mV
50mV
COM
4-20 mA
Safety notices
You MUST observe the following safety notices to prevent damage to
Overview
Introduction
Specifications
Inputs and switch
57 x 27 x 14 mm (approx. 2.3 x 1.1 x 0.6 in.)
12 g nominal (approx. 0.5 oz)
1.5 mm
Function
Input for the positive side of a 4-20 mA loop or 0 to
5 V signal
Input for the positive side of a 0 to 500 mV signal
Input for the positive side of a 0 to 50 mV signal
Input for the negative side of any voltage or current
signal.
Set switch to “ON” for a 4-20 mA loop signal.
Set switch to “OFF” for all voltage signals.
2
solid, 1.0 mm
2
stranded, 16-26 AWG
Pico Technology
DO167-1