PIC24FJ64GA006-I/PT Microchip Technology Inc., PIC24FJ64GA006-I/PT Datasheet - Page 112

• Manufacturer Part Number: PIC24FJ64GA006-I/PT
• Description: 64 PIN, 64KB FLASH, 8 KB RAM, 53 I/O
• Manufacturer: Microchip Technology Inc.

Specifications of PIC24FJ64GA006-I/PT

• A/d Inputs: 16 Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 16 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 53
• Interface: I2C/SPI/UART
• Memory Capacity: 64 Kbytes
• Memory Type: Flash
• Number Of Bits: 16
• Number Of Inputs: 53
• Number Of Pins: 64
• Package Type: 64-pin TQFP
• Programmable Memory: 64K Bytes
• Ram Size: 8K Bytes
• Speed: 16 MHz
• Timers: 5-16-bit
• Voltage, Range: 2-3.6 V
• Voltage, Rating: 2-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

PIC24FJ128GA FAMILY
12.1
REGISTER 12-1:
DS39747C-page 110
Upper Byte:
bit 15
bit 15-14 Unimplemented: Read as ‘0’
bit 13
bit 12-8
bit 7
bit 6-5
bit 4
bit 3
bit 2-0
U-0
—
Input Capture Registers
Legend:
R = Readable bit
-n = Value at POR
ICSIDL: Input Capture x Module Stop in Idle Control bit
1 = Input capture module will halt in CPU Idle mode
0 = Input capture module will continue to operate in CPU Idle mode
Unimplemented: Read as ‘0’
ICTMR: Input Capture x Timer Select bit
1 = TMR2 contents are captured on capture event
0 = TMR3 contents are captured on capture event
ICI1:ICI0: Select Number of Captures per Interrupt bits
11 = Interrupt on every fourth capture event
10 = Interrupt on every third capture event
01 = Interrupt on every second capture event
00 = Interrupt on every capture event
ICOV: Input Capture x Overflow Status Flag (Read-Only) bit
1 = Input capture overflow occurred
0 = No input capture overflow occurred
ICBNE: Input Capture x Buffer Empty Status (Read-Only) bit
1 = Input capture buffer is not empty, at least one more capture value can be read
0 = Input capture buffer is empty
ICM2:ICM0: Input Capture x Mode Select bits
111 = Input capture functions as interrupt pin only when device is in Sleep or Idle mode
110 = Unused (module disabled)
101 = Capture mode, every 16th rising edge
100 = Capture mode, every 4th rising edge
011 = Capture mode, every rising edge
010 = Capture mode, every falling edge
001 = Capture mode, every edge (rising and falling) – ICI<1:0> does not control interrupt generation
000 = Input capture module turned off
Note:
(rising edge detect only, all other control bits are not applicable)
for this mode
U-0
—
Lower Byte:
bit 7
ICTMR
R/W-0
ICxCON: INPUT CAPTURE x CONTROL REGISTER
Timer selections may vary. Refer to the device data sheet for details.
ICSIDL
R/W-0
R/W-0
ICI1
U = Unimplemented bit, read as ‘0’
W = Writable bit
‘1’ = Bit is set
U-0
—
R/W-0
ICI0
Preliminary
U-0
R-0, HC
—
ICOV
‘0’ = Bit is cleared
HS = Set in Hardware
R-0, HC
ICBNE
U-0
—
R/W-0
U-0
ICM2
—
© 2006 Microchip Technology Inc.
HC = Cleared in Hardware
x = Bit is unknown
R/W-0
ICM1
U-0
—
bit 8
R/W-0
ICM0
bit 0