PIC16F1827-E/P Microchip Technology Inc., PIC16F1827-E/P Datasheet - Page 3

• Manufacturer Part Number: PIC16F1827-E/P
• Description: 7 KB Flash, 384 bytes RAM, 32 MHz Int. Osc, 16 I/0, Enhanced Mid Range Core
• Manufacturer: Microchip Technology Inc.

Specifications of PIC16F1827-E/P

• A/d Inputs: 12-Channel, 10-Bit
• Comparators: 2
• Cpu Speed: 8 MIPS
• Eeprom Memory: 256 Bytes
• Input Output: 16
• Interface: CAN/I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 18-pin PDIP
• Programmable Memory: 7K Bytes
• Ram Size: 384 Bytes
• Speed: 32 MHz
• Timers: 4-8-bit, 1-16-bit
• Voltage, Range: 1.8-5.5 V
• Standby Current (pic16lf182x): 30 nA @ 1.8 V, Typical

High-Performance RISC CPU:
• C Compiler Optimized Architecture
• 256 bytes Data EEPROM
• Up to 8 Kbytes Linear Program Memory
• Up to 384 bytes Linear Data Memory Addressing
• Interrupt Capability with Automatic Context Saving
• 16-Level Deep Hardware Stack with Optional
• Direct, Indirect and Relative Addressing modes:
Flexible Oscillator Structure:
• Precision 32 MHz Internal Oscillator Block:
• 31 kHz Low-Power Internal Oscillator
• Four Crystal modes up to 32 MHz
• Three External Clock modes up to 32 MHz
• 4X Phase-Lock Loop (PLL)
• Fail-Safe Clock Monitor:
• Two-Speed Oscillator Start-up
• Reference Clock Module:
Special Microcontroller Features:
• 1.8V-5.5V Operation – PIC16F1826/27
• 1.8V-3.6V Operation – PIC16LF1826/27
• Self-Programmable under Software Control
• Power-on Reset (POR), Power-up Timer (PWRT)
• Programmable Brown-out Reset (BOR)
• Extended Watchdog Timer (WDT):
• Programmable Code Protection
• In-Circuit Serial Programming™ (ICSP™) via
• In-Circuit Debug (ICD) via two pins
• Enhance Low-Voltage Programming
• Power-Saving Sleep mode
 2011 Microchip Technology Inc.
18/20/28-Pin Flash Microcontrollers with nanoWatt XLP Technology
Addressing
Overflow/Underflow Reset
- Two full 16-bit File Select Registers (FSRs)
- FSRs can read program and data memory
- Factory calibrated to ± 1%, typical
- Software selectable frequencies range of
- Allows for safe shutdown if peripheral clock
- Programmable clock output frequency and
and Oscillator Start-up Timer (OST)
- Programmable period from 1ms to 268s
two pins
31 kHz to 32 MHz
stops
duty-cycle
Extreme Low-Power Management
PIC16LF1826/27 with nanoWatt XLP:
• Operating Current: 75 A @ 1 MHz, 1.8V, typical
• Sleep mode: 30 nA
• Watchdog Timer: 500 nA
• Timer1 Oscillator: 600 nA @ 32 kHz
Analog Features:
• Analog-to-Digital Converter (ADC) Module:
• Analog Comparator Module:
• Voltage Reference Module:
Peripheral Highlights:
• 15 I/O Pins and 1 Input Only Pin:
• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler
• Enhanced Timer1:
• Up to three Timer2-types: 8-Bit Timer/Counter with
• Up to two Capture, Compare, PWM (CCP) Modules
• Up to two Enhanced CCP (ECCP) Modules:
• Up to two Master Synchronous Serial Port
• Enhanced Universal Synchronous Asynchronous
• mTouch™ Sensing Oscillator Module:
• Data Signal Modulator Module:
• SR Latch:
- 10-bit resolution, 12 channels
- Auto acquisition capability
- Conversion available during Sleep
- Two rail-to-rail analog comparators
- Power mode control
- Software controllable hysteresis
- Fixed Voltage Reference (FVR) with 1.024V,
- 5-bit rail-to-rail resistive DAC with positive
- High current sink/source 25 mA/25 mA
- Programmable weak pull-ups
- Programmable interrupt-on- change pins
- 16-bit timer/counter with prescaler
- External Gate Input mode
- Dedicated, low-power 32 kHz oscillator driver
8-Bit Period Register, Prescaler and Postscaler
- Software selectable time bases
- Auto-shutdown and auto-restart
- PWM steering
(MSSP) with SPI and I
- 7-bit address masking
- SMBus/PMBus
Receiver Transmitter (EUSART) Module
- Up to 12 input channels
- Selectable modulator and carrier sources
- Multiple Set/Reset input options
- Emulates 555 Timer applications
PIC16(L)F1826/27
2.048V and 4.096V output levels
and negative reference selection
TM
compatibility
2
C
TM
with:
DS41391D-page 3