14101RQD07 Eaton / Control Automation, 14101RQD07 Datasheet - Page 5

• Manufacturer Part Number: 14101RQD07
• Description: SENSOR; PHOT-ELEC; VIS POL REFLEX WITH QUICK DISCONNECT CONNECTOR
• Manufacturer: Eaton / Control Automation
• Type: Photoproximityr

Specifications of 14101RQD07

• Body Style: Cylindrical
• Brand/series: Comet
• Current, Leakage, Off-state: 10 μA
• Current, Output: NPN (Sink): 250 mA Max. @ 30 VDC (120 mA Max. @ Ambient Temp. Over +55°Â°C/+131°F) PNP (Source): 100 mA Max. @ 30 VDC
• Current, Surge: —
• Function: Proximity
• Material, Body: Structural polyurethane foam (Do not expose sensors to concentrated acids, alcohols, or ketones.)
• Material, Lens: Polycarbonate
• Mounting Type: Screw
• Nema Approvals: 1, 2, 3, 4, 4X, 6, 6P, 11, 12 and 13; Connector is rated NEMA 1 only.
• Power Consumption: 1 W
• Primary Type: Photoelectric
• Range, Measurement: 10 Ft.
• Sensing Mode: Polarized Retro-Reflective
• Technology: Photoelectric
• Temperature, Operating: –40 to +70 (–40 to +158) °C (°F)
• Termination: 4-Wire Connector
• Viewing: Right-Angle
• Voltage, Supply: 10-30 VDC

Specifications
Input Voltage
Power Dissipation
Output Type
Current Switching
Voltage Switching
Off-State Leakage
Surge Current
On-State Voltage Drop
Response Time
Time Delay
Short Circuit Protection
Temperature Range
Light/Dark Operation
Enclosure Material
Cable/Connector
Vibration and Shock
Indicator LED
Sunlight Immunity
Enclosure Ratings
Approvals
NOTE: These products conform to NEMA tests as indicated, however, some severe washdown applications can exceed these NEMA test specifications.
For questions about a specific application, contact Eaton’s Cutler-Hammer Sensor Applications Department at 1-800-426-9184.
3-Wire and 4-Wire Sensors
AC/DC Models
(AC Operation)
20 to 264V AC, 50/60 Hz
1.5W maximum
VMOS (bi-directional)
300 mA maximum
375V peak maximum
250 µA typical;
500µA maximum
2A maximum
—
10 mS
Sensor will turn off immediately when short or overload is
detected (Indicator LED flashes). Turn power OFF and back ON to
reset. IMPORTANT: During installation, correct power
connections must be made first to ensure fail-safe short circuit
protection of outputs.
Lens: polycarbonate; Cable jacket: PVC; Body: structural polyurethane foam (do not expose to concentrated acids, alcohols or ketones)
Thru-Beam Source: -4° to +158°F (-20° to +70°C); All others: -40° to +158°F (-40° to +70°C)
Connector versions: male mini and micro connectors (refer to wiring diagrams for number of pins per model) on nominal 8” pigtails
Lights steady when output is ON; flashes when short circuit protection is in latch condition (except 2-wire models)
AC/DC Models
(DC Operation)
15 to 30V DC
(15 to 24V DC above 131°F/55°C)
1.5W maximum
NPN (sink)
300 mA maximum
375V peak maximum
250 µA typical;
500 µA maximum
2A maximum
1.8V at 10 mA; 3.5V at 300 mA
NEMA 1, 2, 3, 4, 4X, 6, 12 and 13
UL and C-UL Recognized (all models), CE Compliant (except 2-wire DC models)
Vibration: 30g over 10 Hz to 2 kHz; Shock: 100g for 3 mS 1/2 sine wave pulse
Photoelectric Sensors
Comet Series
Perfect Prox: 5,000 foot-candles; All others: 10,000 foot-candles
Models with Fixed Time Delay Available — Contact Factory
Cable versions: 6-foot cable;
Switch selectable
NEMA 6P Models Available — Contact Factory
DC-Only Models
10 to 30V DC, (10 to 24V DC
above 131°F/55°C)
1W maximum
NPN and PNP (dual outputs)
PNP: 100 mA maximum;
NPN: 250 mA maximum
(NPN: 120 mA maximum above
131°F/55°C)
30V DC maximum
10 µA maximum
1A maximum
NPN: 400 mV at 10 mA,
1.5V at 250 mA; PNP:
2.4V at 100 mA
1 mS; 3.5 mS (thru-beam)
Sensor will turn off immediately
when short or overload is
detected (indicator LED
flashes). Sensor will reset
when short is removed.
2-Wire Sensors
AC Models
90 to 132V AC,
50/60 Hz
2W maximum
DMOS
300 mA
132V AC maximum
1.7 mA maximum
1A maximum
10V AC
32 mS
Auto reset
-13° to +131°F (-25° to +55°C)
DC Models
18 to 50V DC
2W maximum
DMOS
300 mA
50V DC maximum
1.5 mA maximum
1A maximum
8V DC
32 mS
Auto reset
5-37