SDU24-DB9 Sola / Hevi-Duty, SDU24-DB9 Datasheet - Page 2

• Manufacturer Part Number: SDU24-DB9
• Description: Optional Interface Kit to Convert Relay Contacts Signals to DB9 Signals
• Manufacturer: Sola / Hevi-Duty
• Type: Hardware Kitsr

Specifications of SDU24-DB9

• Brand/series: SDU Series
• Weight: 1 (0.45) Lbs. (kg)

Voltage
Range
Voltage
Range
Protection
Time
(to 90% of full
capacity)
(full load)*
(kg)
x D - in. (mm)
Operating
Temperature
Temperature
US Standard
Canadian Standard
CE
MTBF
Output
Mounting
Connections
Relay Contact
Terminal
Connections
Case
Free Space
Notes:
battery modules (SDU 24-BAT or SDU 24BATEM).
Nominal Voltage
Protection
Charging Current
Enclosure
Dimension in. (mm)
Enclosure Type
Terminal Connector Type
Batteries
Accessories
Operating Temperature
Storage Temperature
Humidity
Safety Standard for
DC UPS System*
Weight - lbs (kg)
Mounting
Notes:
1) AC/DC Power Supply
2) Power Module: SDU 10-24 or SDU 20-24
3) Battery Module: SDU 24-BAT
4) Optional battery module for extended Back-up.
Specifications
Battery Module Specifications
Protection
Battery Low
Overload
Input Nominal
Input Voltage
Input Fuse
Nominal Output
Output Voltage
Output Current
Current Limit
Input Protection
Overload
Short Circuit
Type
Charging Current
Typical Recharge
Back-up Time
Net Weight - lbs
Dimensions H x W
Audible Noise
Power Module
Storage
Humidity
Max Elevation
Shock & Vibration
1. See Battery Back-up Times below.
2. DC UPS System includes one power module (SDU 10-24 or SDU 20-24) and one or more
Catalog Number
Parameter
Simple snap-on system for DIN Rail TS35/7.5 or TS35/15 or chassis-mounted, optional
Directive 2004/108/EC: EN 62040-2 Category C2 EN 55022 Class A + A1 + A2, CISPR 22
Input & Output: IP20-rated screw terminals, connector size range: 16-12 AWG (0.5-4
Outputs are capable of providing high currents for short periods of time for inductive
Class A (2005), IEC 61000-3-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC
Fusing may be required for wire/loads if 2x Nominal O/P current rating cannot be
Fully enclosed metal housing with ventilation grid to keep out small particles.
1 ft. polarized battery cable
Simple snap-on system for
20 mm above and 35 mm below, 20 mm left and right, 10 mm in front
IP20 screw terminals; connector size range: 24-16 AWG (0.34-4mm2)
screw mounting set SDU-
or TS35/15 or chassis-
the complete depletion of the battery, short circuit protection by a 30A fuse.
4.88 x 8.27 x 4.55
(124 x 210 x 116)
DIN Rail TS35/7.5
mounted, optional
61000-4-5, IEC 61000-4-6 + A1, IEC 61000-4-8, IEC 61000-2-2
Continuous current overload allows for reliable fuse tripping
SDU 24-BAT
CAN/CSA C22.2 No 107.1-01, CAN/CSA C22.2 No. 60950-1
SDU 10-24
UPS Shutdown when battery voltage drops below 22V to prevent
14 minutes
Fuse: 30A
12 (5.33)
PMBRK.
UL60950-1, IEC 60950-1, UL508, CE
0.5A
IP20
DC UPS System** Safety
10A
12A
Low Voltage Directive IEC 60950-1 (CB Scheme)
-20 degrees C to +50 degrees C
-20 degrees C to +40 degrees C
Polarized Powerpole Connectors
Sealed maintenance-free lead acid batteries
CAN/CSA C22.2 No 107.1-01
CAN/CSA C22.2 No 60950-1
Fuse for overload & short circuit protection
UL 60950-1, UL508, FCC Part 15, Class A
Battery Module
12 Hours for each additional Battery Module
Input Voltage
95% no condensation
Environment
Replaceable Batteries
4.88 x 3.02 x 4.55 (124 x 77 x 116)
Installation
Rapid Audible Indicator every 1 second
for copper conductors rated 90°C.
Protection
> 200,000 Hours, MIL-STD HDBK-217F
screw mounting set SDU-PMBRK.
<40 dBA (1 meter from surface)
-20 degrees C to +50 degrees C
-20 degrees C to +70 degrees C
Physical
UPS output cut off immediately
General
Output
Alarm
Electrical Circuit Protection
3500 meters (11,483 feet)
24 Hours for 2 Battery Module
load startup or switching.
8 Hours for 1 Battery Module
Continuous Audible Indicator
Notes:
1) AC/DC Power Supply
2) Power Module: SDU 10-24 or SDU 20-24
3) Battery Module: SDU 24-BATEM
24 Vdc
According to ISTA 2A
22.5 - 30 Vdc
DC Fuse 30A
6 ft. polarized battery cable
22.5 - 30 Vdc
1.65 (0.75)
Circuit Breaker: 24V, 25A
tolerated.
Wall/Chassis Mounting
0-95%
24 Vdc
24 Vdc
mm2)
0.5 A
11.5 x 5.57 x 4.57
(292 x 142 x 116)
SDU 24-BATEM
16 (7.11)
NEMA 1
0.8A
SDU 20-24
4 minutes
20A
22A