102-B YELLOW TAPESWITCH, 102-B YELLOW Datasheet - Page 2

• Manufacturer Part Number: 102-B YELLOW
• Description: Switch, Do It Yourself Material, Yellow, 12 oz, Finger Press Sensivity
• Manufacturer: TAPESWITCH

Specifications of 102-B YELLOW

• Function: Pressure
• Primary Type: Pressure
• Lead Free Status / Rohs Status: RoHS Exempt Product

Controflex
ControFlex
Ribbon Switch
131-A (Sleeve end)
131-AMT (Block End)
General purpose switch for
foot, hand or mechanical
activation. Bends without
shorting. Sensitivity decreas-
es at bend.
By holes in block ends.
Channel #106 or DA-12
double adhesive tape.
(nominal) 40 oz. (11N) Q
See pg. 6
PVC-Light Grey
AWG #18, 18in. (460mm)
.8 oz./ft. (74.4 g/m)
1 in. (25mm)
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
(Not recommended)
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test. FAIL-SAFE
leads. Adhesive backing.
Interconnect joint.
4
131-AMT (Block End)
131-A (Sleeve end)
TAPESWITCH
CORPORATION
101-B (Sleeve end)
ControFlex
Ribbon Switch
101-B (Sleeve end)
101-BMT (Block End)
Medium sensitivity general
purpose switch. May be bent
sharply without shorting and
sensitivity at bend is not
decreased.
By holes in block ends.
Channel #106 or DA-12
double adhesive tape.
(nominal) 12 oz. (3N) Q
See pg. 6
PVC-Yellow or Black
AWG #18, 18in. (460mm)
.8 oz./ft. (74.4 g/m)
<2 in. (50mm)
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
(Not recommended)
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test. FAIL-SAFE
leads. Adhesive backing.
Interconnect joint.
100 Schmitt Boulevard
Farmingdale, NY 11735
BMT (Block End)
®
Ribbon Switches
101-
Product Selection Guide
ControFlex
Ribbon Switch
121-BP (Welded end only)
Most sensitive switch. Small
cross section. Use exposed
or under cover.
Channel #104 or DA-32
double adhesive tape.
(nominal) 8 oz. (2N) Q
See pg. 6
PVC-Light Green or Black
.7 oz./ft. (65.1 g/m)
1/2 in. (12mm)
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
(Not recommended)
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test. FAIL-SAFE
leads. Adhesive backing.
Interconnect joint.
AWG #22, 18 in. (460mm)
121-BP (Welded end only)
Home Page: www.tapeswitch.com
Email: [e-mail]
High Bead ControFlex
Ribbon Switch
141-BPH (Welded end only)
Similar to 121-BP, but with
high actuating bead. Suitable
for basic leading edge safety
switches, covered or
uncovered.
Channel #104 or DA-32
double adhesive tape.
(nominal) 8 oz. (2N) Q
See pg. 6
PVC-White, Red or Black
AWG #22, 18 in. (460mm)
.8 oz./ft. (74.4 g/m)
1/2 in. (12mm)
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
(Not recommended)
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test. FAIL-SAFE
leads. Adhesive backing.
Interconnect joint.
141-BPH (Welded end only)
Tel: [phone]
Fax: [phone]
ControFlex Stainless
Steel Ribbon Switch
191-S (Welded end only)
Stainless steel conductor is
ideal for some severe
environments, including
underwater. Cannot be bent
sharply.
DA-32 double adhesive tape.
(nominal) 12 oz. (3N)Q
See pg. 6
PVC-Beige
AWG #22, 18 in. (460mm)
.5 oz./ft. (46.5 g/m)
2 in. (50mm)
1000 VAC for 2 minutes
(Recommended)
28 VAC or VDC at 1.0 A
(Not recommended)
140 VAC @ 1A
0 °F to 120 °F
(-18 °C to 50 °C)
Non-standard switch lengths.
Non-standard lead lengths.
Air Leak test. FAIL-SAFE
leads. Adhesive backing.
Interconnect joint.
191-S (Welded end only)