SG2-90-030-OO-X IDEC, SG2-90-030-OO-X Datasheet - Page 3

• Manufacturer Part Number: SG2-90-030-OO-X
• Description: SAFETY LIGHT CURTAIN
• Manufacturer: IDEC

Specifications of SG2-90-030-OO-X

• Safety Curtain Category: Level 2
• Control Output Type: 2PNP OSSD
• No. Of Beams: 16
• Protection Height: 300mm
• Sensing Range Max: 90mm
• Supply Voltage Max: 24V
• Beam Spacing: 90mm

Applications
The SG safety light curtain family provides solutions for automation where
access to hazardous areas must be controlled. In particular, safety curtains
can be used to stop machine movement in the following industries.
SG2 Series
Milling Machine
Situation: Protect operator hand’s from injury from moving parts.
Solution: The machine’s movement stops immediately even if only one
of the safety light curtain beams is interrupted.
Machine Restart Prevention
Situation: Avoid accidental machine restart when an operator is per-
forming maintenance.
Solution: A safety light curtain can stop a machine when the operator
enters a hazardous area. A manual restart is then necessary to restart
the production cycle. Horizontal light curtains are positioned and actu-
ally connected to the restart of the main light curtain in the areas where
the operator may not be visible when doing maintenance.
Robotic Manufacturing
Situation: Protect operator from being hit or crushed by a robotic arm’s
movement.
Solution: The robot stops when the operator enters a hazardous area
and interrupts the optic grid, usually placed on the floor.
•
Automated manufacturing
7
SG4 Series
Operating Point Protection on a Drilling Machine
Situation: An operator positions a part before machining and removes
it when done and must be protected from injury while working.
Solution: When the operator’s hand interrupts the light beam, the SG4
series of safety light curtains stop the machine’s movement because the
light curtain can be installed directly on the machine near the hazard.
Paper Cutting Machines
Situation: These machines typically cut paper to a specific size for
newspapers or special applications and the operator needs to be pro-
tected against injury from the cutter blades.
Solution: Installed directly on the machine near the hazardous area,
the SG4 series of safety light curtains stop the machine when the op-
erator’s hand interrupts the light beam.
Machine Press
Situation: Protect operator from either being pinned between the top
and bottom portions of a machine press, or struck by the machined part
while it is moving.
Solution: If even one beam of the SG4 series safety light curtain is
interrupted by an operator’s hand or finger, while the press is moving,
the mobile tool bar will stop.
•
•
•
•
Packaging, material handling & storage machines
Textile, woodworking and ceramic
Automatic and semi-automatic assembling lines
Automatic warehouse & inventory systems
800-262-IDEC