PIC32MX460F512L-80V/BG Microchip Technology, PIC32MX460F512L-80V/BG Datasheet - Page 109

• Manufacturer Part Number: PIC32MX460F512L-80V/BG
• Description: 512 KB Flash, 32 KB RAM, USB-OTG, 80 MHz, 10-Bit ADC, DMA 121 XBGA 10x10x1.20mm
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX460F512L-80V/BG

• Processor Series: PIC32MX4xx
• Core: MIPS
• Data Bus Width: 32 bit
• Program Memory Type: Flash
• Program Memory Size: 512 KB
• Data Ram Size: 32 KB
• Interface Type: USB, I2C, UART, RS-232, RS-485, SPI
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 5
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Package / Case: XBGA-121
• Operating Temperature Range: - 40 C to + 105 C
• Supply Current (max): 10 mA
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: -
• Eeprom Size: -
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Lead Free Status / Rohs Status: Details

16.0
FIGURE 16-1:
© 2011 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
Note 1: Where ‘x’ is shown, reference is made to the registers associated with the respective output compare
2: Some registers and associated bits
OUTPUT COMPARE
of the PIC32MX3XX/4XX family of
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 16. “Output
Compare” (DS61111) of the “PIC32
Family Reference Manual”, which is
available from the Microchip web site
(www.microchip.com/PIC32).
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
2: The OCFA pin controls the OC1-OC4 channels. The OCFB pin controls the OC5 channel.
3: Each output compare channel can use one of two selectable 16-bit time bases or a single 32-bit timer base.
channels 1 through 5.
16
TMR register inputs
from time bases
(see Note 3)
OUTPUT COMPARE MODULE BLOCK DIAGRAM
Comparator
OCxRS
0
OCxR
(1)
(1)
1
16
OCTSEL
Period match signals
from time bases
(see Note 3)
0
in
1
Mode Select
OCM<2:0>
The Output Compare module (OCMP) is used to gen-
erate a single pulse or a train of pulses in response to
selected time base events. For all modes of operation,
the OCMP module compares the values stored in the
OCxR and/or the OCxRS registers to the value in the
selected timer. When a match occurs, the OCMP mod-
ule generates an event based on the selected mode of
operation.
The following are some of the key features:
• Multiple output compare modules in a device
• Programmable interrupt generation on compare
• Single and Dual Compare modes
• Single and continuous output pulse generation
• Pulse-Width Modulation (PWM) mode
• Hardware-based PWM Fault detection and
• Programmable selection of 16-bit or 32-bit time
• Can operate from either of two available 16-bit
event
automatic output disable
bases.
time bases or a single 32-bit time base
Output
3
Logic
Set Flag bit
OCxIF
PIC32MX3XX/4XX
(1)
Enable
Output
R
S
Q
Output Enable
Logic
DS61143H-page 109
OCFA or OCFB
(see Note 2)
OCx
(1)