B41231B0568M000 EPCOS Inc, B41231B0568M000 Datasheet - Page 15

• Manufacturer Part Number: B41231B0568M000
• Description: Aluminum Electrolytic Capacitors - Snap In 5600UF 80V 35X35 SNAP IN
• Manufacturer: EPCOS Inc
• Series: B41231r

Specifications of B41231B0568M000

• Capacitance: 5600 uF
• Tolerance: 20 %
• Voltage Rating: 80 Volts
• Operating Temperature Range: - 40 C to + 85 C
• Diameter: 35 mm (1.38 in)
• Length: 35 mm (1.38 in)
• Load Life: 2000 Hrs
• Termination Style: Snap In
• Lead Free Status / Rohs Status: Details

Cautions and warnings
Personal safety
The electrolytes used by EPCOS have not only been optimized with a view to the intended
application, but also with regard to health and environmental compatibility. They do not contain
any solvents that are detrimental to health, e.g. dimethyl formamide (DMF) or dimethyl acetamide
(DMAC).
Furthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. They
contain flame-retarding substances which will quickly extinguish any flame that may have been
ignited.
As far as possible, EPCOS does not use any dangerous chemicals or compounds to produce
operating electrolytes. However, in exceptional cases, such materials must be used in order to
achieve specific physical and electrical properties because no safe substitute materials are
currently known. However, the amount of dangerous materials used in our products has been
limited to an absolute minimum. Nevertheless, the following rules should be observed when
handling Al electrolytic capacitors:
Please read Cautions and warnings and
Important notes at the end of this document.
Any escaping electrolyte should not come into contact with eyes or skin.
If electrolyte does come into contact with the skin, wash the affected parts immediately with
running water. If the eyes are affected, rinse them for 10 minutes with plenty of water. If
symptoms persist, seek medical treatment.
Avoid breathing in electrolyte vapor or mists. Workplaces and other affected areas should be
well ventilated. Clothing that has been contaminated by electrolyte must be changed and
rinsed in water.
Page 15 of 20
Standard series
B41231
85 C