BFC237138105 Vishay, BFC237138105 Datasheet - Page 15

• Manufacturer Part Number: BFC237138105
• Description: Polyester Film Capacitors 1uF 10% 63volts
• Manufacturer: Vishay

Specifications of BFC237138105

• Capacitance: 1 uF
• Tolerance: 10 %
• Voltage Rating: 63 Volts
• Termination Style: Radial
• Dimensions: 5 mm W x 10 mm L x 10.5 mm H
• Lead Spacing: 7.5 mm
• Operating Temperature Range: 0 C to + 85 C
• Product: Metallized Polyester Film Capacitors
• Lead Free Status / Rohs Status: Details
• Other names: 222237138105

MKT 371, MKT 372, MKT 373
DC Film Capacitor
Vishay BCcomponents
MKT Radial Potted Type
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting in printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 or end of catalog.
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that stand-off pips are in good contact with the printed-circuit
board.
• For L ≤ 15 mm capacitors shall be mechanically fixed by the leads
• For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements On Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
• Product height with seating plane as given by “IEC 60717” as reference: h
≤ h + 0.3 mm
max.
b
= b + 0.3 mm
max.
Eccentricity
I
= I + 0.3 mm
max.
Storage Temperature
• Storage temperature: T
= - 25 °C to + 40 °C with RH maximum 80 % without condensation
stg
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 ± 2 %.
For reference testing, a conditioning period shall be applied over 96 ± 4 h by heating the products in a circulating air oven at the
rated temperature and a relative humidity not exceeding 20 %.
www.vishay.com
For technical questions, contact: [e-mail]
Document Number: 28109
108
Revision: 08-Dec-08