MCP23S08-E/SO Microchip Technology, MCP23S08-E/SO Datasheet - Page 8

• Manufacturer Part Number: MCP23S08-E/SO
• Description: IC I/O EXPANDER SPI 8B 18SOIC
• Manufacturer: Microchip Technology

Specifications of MCP23S08-E/SO

• Package / Case: 18-SOIC (7.5mm Width)
• Interface: SPI
• Number Of I /o: 8
• Interrupt Output: Yes
• Frequency - Clock: 10MHz
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Includes: POR
• Logic Family: MCP23S08
• Propagation Delay Time: 50 ns
• Operating Supply Voltage: 1.8 V to 5.5 V
• Power Dissipation: 700 mW
• Operating Temperature Range: - 40 C to + 125 C
• Input Voltage: 1.8 V to 5.5 V
• Logic Type: I/O Expander
• Maximum Clock Frequency: 10 MHz
• Maximum Operating Frequency: 1.7 MHz
• Mounting Style: SMD/SMT
• Output Current: 25 mA
• Output Voltage: 1.8 V to 4.5 V
• Chip Configuration: 8 Bit
• Bus Frequency: 10MHz
• Ic Interface Type: Serial, SPI
• No. Of I/o's: 8
• Supply Voltage Range: 1.8V To 5.5V
• Digital Ic Case Style: SOIC
• No. Of Pins: 18
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Delay Time: 50ns
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: GPIODM-KPLCD - BOARD DEMO LCD GPIO EXP KEYPAD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

MCP23008/MCP23S08
1.4.1
The MCP23008 is a slave I
slave addressing, with the read/write bit filling out the
control byte. The slave address contains four fixed bits
and three user-defined hardware address bits (pins A2,
A1 and A0). Figure 1-2 shows the control byte format.
1.4.2
The MCP23S08 is a slave SPI device. The slave
address contains five fixed bits and two user-defined
hardware address bits (pins A1 and A0), with the read/
write bit filling out the control byte. Figure 1-3 shows
the control byte format.
FIGURE 1-4:
FIGURE 1-5:
DS21919E-page 8
CS
S
0
0
ADDRESSING I
(MCP23008)
ADDRESSING SPI DEVICES
(MCP23S08)
1
1
Device Opcode
Device Opcode
0
0
I
SPI ADDRESSING REGISTERS
2
C™ ADDRESSING REGISTERS
0
0
2
C device that supports 7-bit
A2 A1 A0
2
0
C DEVICES
The ACKs are provided by the MCP23008.
A1 A0 R/W
R/W = 0
0
ACK
A7
A7
FIGURE 1-2:
FIGURE 1-3:
A6
A6
Start
bit
CS
S
A5
A5
0
0
R/W = 0 = write
R/W = 1 = read
Register Address
Register Address
R/W = 0 = write
R/W = 1 = read
1
A4
1
A4
Slave Address
Slave Address
0
0
Control Byte
Control Byte
A3
A3
I
FORMAT
SPI CONTROL BYTE
FORMAT
0
2
0
© 2007 Microchip Technology Inc.
C™ CONTROL BYTE
A2
A2
A2 A1 A0 R/W ACK
0
R/W bit
ACK bit
R/W bit
A1 A0 R/W
A1
A1
A0
A0
ACK