NRS6045T101MMGK Taiyo Yuden, NRS6045T101MMGK Datasheet - Page 21

• Manufacturer Part Number: NRS6045T101MMGK
• Description: INDUCTOR POWER 100UH 750MA SMD
• Manufacturer: Taiyo Yuden
• Series: NRSr
• Type: -r

Specifications of NRS6045T101MMGK

• Inductance: 100µH
• Current: 750mA
• Current - Saturation: 900mA
• Current - Temperature Rise: 750mA
• Tolerance: ±20%
• Shielding: Shielded
• Dc Resistance (dcr): 605.8 mOhm Max
• Q @ Freq: -
• Self Resonant Freq: 3MHz
• Package / Case: 0.236" L x 0.236" W x 0.177" H (6.00mm x 6.00mm x 4.50mm)
• Mounting Type: Surface Mount
• Operating Temperature: -25°C ~ 120°C
• Frequency - Test: 100kHz
• Material - Core: -
• Applications: Power Supplies
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 587-2947-2

wound0103_reli-PRP6
■
LEM Type，LB Type，CB Type
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
1． Circuit Design
2． PCB Design
3． Considerations for automatic placement
4． Soldering
5． Cleaning
6． Handling
7． Storage conditions
Precautions
Precautions
Precautions
Precautions
Precautions
Precautions
Precautions
Technical
consider-
Technical
consider-
Technical
consider-
Technical
consider-
Technical
consider-
Technical
consider-
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
PRECAUTIONS
ations
ations
ations
ations
ations
ations
【Recommended Land Patterns】
◆Operating environment
◆Land pattern design
PRECAUTIONS
・ Mounting and soldering conditions should be checked beforehand.
・ Applicable soldering process to those products is reflow soldering only.
◆Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
◆Wave soldering （LEM Type only）
◆Reflow soldering （LB and CB Types）
◆Reflow soldering （LEM）
◆Recommended conditions for using a soldering iron
◆Wave soldering （LEM Type only）
◆Reflow soldering （LB and CB Types）
◆Recommended conditions for using a soldering iron
◆Cleaning conditions
◆Cleaning conditions
◆Handling
◆Breakaway PC boards （splitting along perforations）
◆Mechanical considerations
◆Handling
◆Breakaway PC boards （splitting along perforations）
◆Mechanical considerations
◆Storage
◆Storage
Surface Mounting
1． Please contact any of our offices for a land pattern, and refer to a recommended land pattern of a right figure or specifications.
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
1． For wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant specifications.
1． For reflow soldering with either leaded or lead-free solder,the profile specified in "point for controlling" is recommended.
1． For reflow soldering, please apply conditions meeting the range of the specified conditions in our catalog or the relevant specifications.
1． Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350℃ Duration-3 seconds or less. The soldering iron shoud not come in contact
1． Components can be damaged by excessive heat where soldering conditions exceed the specified range.
1． Reflow profile
1． Components can be damaged by excessive heat where soldering conditions exceed the specified range.
Washing by supersonic waves shall be avoided.
If washed by supersonic waves, the products might be broken.
1． Keep the inductors away from all magnets and magnetic objects.
1． When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the board.
2． Board separation should not be done manually, but by using the appropriate devices.
1． Please do not give the inductors any excessive mechanical shocks.
1． To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled.
・Recommended conditions
Ambient temperature：0～40℃ ／ Humidity：Below 70% RH
1． The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,
1． There is a case that a characteristic varies with magnetic influence.
1． Planning pattern configurations and the position of products should be carefully performed to minimize stress.
1． There is a case to be damaged by a mechanical shock.
1． Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
with inductor directly.
The ambient temperature must be kept below 30℃ even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For
LB type：Should be used within 6 months from the time of delivery.
LE type：In case of storage over 6 months, solderability shall be checked before actual usage.
this reason, LE type inductors should be used within one year from the time of delivery.
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product
failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
300
250
200
150
100
50
0
180℃
150℃
Pre-heat zone
90±30 sec
30±10 sec
Peak Temp: 260＋0/ー5℃
230℃ Minn
5 sec Max
1 1
wound0103_reli_e-01