NRS6028T101MMGJ Taiyo Yuden, NRS6028T101MMGJ Datasheet - Page 18

• Manufacturer Part Number: NRS6028T101MMGJ
• Description: INDUCTOR POWER 100UH 660MA SMD
• Manufacturer: Taiyo Yuden
• Series: NRSr
• Type: -r

Specifications of NRS6028T101MMGJ

• Inductance: 100µH
• Current: 660mA
• Current - Saturation: 650mA
• Current - Temperature Rise: 660mA
• Tolerance: ±20%
• Shielding: Shielded
• Dc Resistance (dcr): 780 mOhm Max
• Q @ Freq: -
• Self Resonant Freq: 3MHz
• Package / Case: 0.236" L x 0.236" W x 0.110" H (6.00mm x 6.00mm x 2.80mm)
• Mounting Type: Surface Mount
• Operating Temperature: -25°C ~ 120°C
• Frequency - Test: 100kHz
• Material - Core: -
• Applications: Power Supplies
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 587-2935-2

【Test Methods and Remarks】
【Test Methods and Remarks】
【Test Methods and Remarks】
【Test Methods and Remarks】
【Test Methods and Remarks】
■
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
wound0103_reli_e-01
10.Body Strength
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM, LEM Series
LB・LBC・LBR・CB・CBC・CBL・LBM・LEM2520
LB1608・LBMF1608・CBMF1608
11.Adhesion of terminal electrode
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM, LEM Series
12.Resistance to vibration
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM, LEM Series
13.Drop test
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM Series
LEM Series
14.Solderability
LB, LBC, LBR, LBMF Series
CB, CBC, CBL, CBMF Series
LBM, LEM Series
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF・LEM2520 Applied force：10N to X and Y directions
LB1608・CBMF1608・LBMF1608
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：According to JIS C5102 clause 8.2.
Vibration type：A
Directions：2 hrs each in X, Y and Z directions. Total：6 hrs
Frequency range：10 to 55 to 10 Hz （1min.）
Amplitude：1.5mm
Mounting method：Soldering onto printed board
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
LEM：
Acceleration：980m/sec2
Duration：6msec
Number of times：6 sides × 3 times
Mounting method：Soldering onto printed board
Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM：Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
LEM：
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： Solder temperature：245±5℃
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
RELIABILITY DATA
Applied force：10N
Duration：10sec.
Applied force：5N
Duration：10sec.
Solder temperature：230±5℃
Duration：5±0.5sec.
Flux：Methanol solution with 25％ of colophony
Duration：5±0.5sec
Flux：Methanol solution with 25％ of colophony
Duration：5 sec.
Test substrate：Printed board
Applied force：5N to X and Y directions
Duration：5 sec.
Test substrate：Printed board
No damage.
No abnormality.
Inductance change:Within±10％
Inductance change:Within±5％
Inductance change:Within±5％
At least 90％ of surface of terminal electrode is covered by new
1 1
No significant abnormality in appearance.
No significant abnormality in appearance.
No significant abnormality in appearance.
wound0103_reli-PRP3