533082-1 TE Connectivity, 533082-1 Datasheet - Page 2

• Manufacturer Part Number: 533082-1
• Description: High Speed / Modular Connectors .100 ACC GUIDE PIN
• Manufacturer: TE Connectivity
• Series: AMP-HDI Seriesr

Specifications of 533082-1

• Number Of Positions / Contacts: 4
• Termination Style: Screw
• Contact Material: Brass
• Contact Plating: Unplated
• Product Type: Contact
• Pcb Mount Retention: Without
• Thread Length (mm [in]): 9.52 [0.375]
• Contact Type: Pin
• Contact Plating, Mating Area, Material: Unplated
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / Rohs Status: Details

3.4.
3.5.
Exam ination of product.
Term ination resistance, specified
current.
Term ination resistance, low level.
Dielectric withstanding voltage.
Insulation resistance.
Vibration.
Physical shock.
Mating force.
Rev C
Perform ance and Test Description
Connectors shall be designed to m eet electrical, m echanical and environm ental perform ance
requirem ents specified in Figure 1.
Test Requirem ents and Procedures Sum m ary
Test Description
.015 ohm s m axim um initial.
Meets requirem ents of product
drawing.
.015 ohm s m axim um initial.
.020 ohm s m axim um final.
.020 ohm s m axim um final.
2 m illiam peres m axim um leakage
current.
5000 m egohm s m inim um initial.
No discontinuities greater than 1
m icrosecond.
No physical dam age.
No discontinuities greater than 1
m icrosecond.
No physical dam age.
Term ination resistance, low level.
1.9 ounces m axim um average per
contact.
Test Voltage
(rm s)
900
200
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
Sea Level
70,000
Altitude
Feet
Test between adjacent contacts of
Visual, dim ensional and functional
per applicable inspection plan.
Measure potential drop of m ated
contacts assem bled in housing
using 3 am peres m axim um
Calculate resistance.
See Figure 3.
TE Spec 109-25.
Subject m ated contacts assem bled
in housing to 50 m v open circuit at
100 m a m axim um .
See Figure 3.
TE Spec 109-6-1.
Tests between adjacent contacts of
unm ated connector and contacts to
hardware.
TE Spec 109-29-1.
unm ated connector and contacts to
hardware.
TE Spec 109-28-4.
Subject wired and m ated
connectors to 15 G's 10-2000 Hz
with 100 m a current applied.
TE Spec 109-21-3.
Subject wired and m ated connector
to 100 G's sawtooth shock pulses of
6 m illiseconds duration. 3 m utually
perpendicular planes, total 18
shocks.
TE Spec 109-26-9.
Measure force necessary to m ate
connector assem bly after 3
unm onitored cycles.
Calculate force per contact.
TE Spec 109-42, Condition A.
Procedure
108-9063
2 of 6