45-21/KK2C-S30308BACB41/2T Everlight Electronics Co Ltd, 45-21/KK2C-S30308BACB41/2T Datasheet - Page 12

• Manufacturer Part Number: 45-21/KK2C-S30308BACB41/2T
• Description: LED LOW PWR 0.06W 2PLCC
• Manufacturer: Everlight Electronics Co Ltd

Specifications of 45-21/KK2C-S30308BACB41/2T

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1080-1202-2

1. Over-current-proof
2. Storage
3. Soldering Condition
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
SMD Low Power LED
45-21/XK2C-SXXXXXXXXXX/2T
12
DATASHEET
Customer must apply resistors for protection; otherwise slight voltage shift will cause big current
change(Burn out will happen).
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30
2.3 After opening the package: The LED's floor life are 168 hours under 30 ℃ or less and 60% RH or less.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage
3.1 Pb-free solder temperature profile
Precautions for Use
If unused LEDs remain, it should be stored in moisture proof packages.
time, baking treatment should be performed using the following conditions.
Baking treatment: 60±5
Copyright © 2010, Everlight All Rights Reserved. Release Date : XX.XX.2010. Issue No: XXXXXXX_v1.
Device No: XXXXXXX
℃
for 24 hours.
℃
or less and 90%RH or less.
www.everlight.com