12-21SYGC/S530-E2/TR8 Everlight Electronics Co Ltd, 12-21SYGC/S530-E2/TR8 Datasheet - Page 8
12-21SYGC/S530-E2/TR8
Manufacturer Part Number
12-21SYGC/S530-E2/TR8
Description
LED SUPER YLW/GRN CLEAR RA 1206
Manufacturer
Everlight Electronics Co Ltd
Datasheets
1.12-21SYGCS530-E2TR8.pdf
(9 pages)
2.12-21SYGCS530-E2TR8.pdf
(9 pages)
3.12-21SYGCS530-E2TR8.pdf
(8 pages)
Specifications of 12-21SYGC/S530-E2/TR8
Lead Free Status / Rohs Status
Vendor undefined / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
12-21SYGC/S530-E2/TR8
Manufacturer:
SHARP
Quantity:
10 238
Precautions For Use
1. Over-current-proof
2. Storage
3. Soldering Condition
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
Device No. : SZDSE-121-015
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
If unused LEDs remain, it should be stored in moisture proof packages.
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
Prepared date: 19-Feb-2009
http://www.everlight.com
12-21SYGC/S530-E2/TR8
Prepared by: Qilong Chen
Rev.1
Page: 8 of 9