16-213SYGC/S530-E3/TR8 Everlight Electronics Co Ltd, 16-213SYGC/S530-E3/TR8 Datasheet - Page 10

• Manufacturer Part Number: 16-213SYGC/S530-E3/TR8
• Description: LED SUPER YLW/GRN WATER CLR 0402
• Manufacturer: Everlight Electronics Co Ltd

Specifications of 16-213SYGC/S530-E3/TR8

• Lead Free Status / Rohs Status: Vendor undefined / RoHS Compliant

4.Soldering Iron
once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
Everlight Electronics Co., Ltd.
Device No: DSE-163-023
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within
Tucheng, Taipei 236, Taiwan, R.O.C
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
EVERLIGHT ELECTRONICS CO.,LTD.
http://www.everlight.com
Prepared date: 04-Nov-2005
Tel: [phone]
Fax: [phone]
http://www.everlight.com
16-213UYC/S530-XX/TR8
Rev: 2
Prepared by: Ashley Kuo
Page: 10 of 10