ADG612YRUZ Analog Devices Inc, ADG612YRUZ Datasheet - Page 10

• Manufacturer Part Number: ADG612YRUZ
• Description: IC SWITCH QUAD SPST 16TSSOP
• Manufacturer: Analog Devices Inc

Specifications of ADG612YRUZ

• Function: Switch
• Circuit: 4 x SPST - NC
• On-state Resistance: 115 Ohm
• Voltage Supply Source: Dual Supply
• Voltage - Supply, Single/dual (±): ±2.7 V ~ 5.5 V
• Current - Supply: 0.0001µA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 16-TSSOP (0.173", 4.40mm Width)
• Analog Switch Type: SPST
• No. Of Channels: 4
• Bandwidth: 680MHz
• On State Resistance Max: 85ohm
• Turn Off Time: 25ns
• Turn On Time: 45ns
• Supply Voltage Range: ± 2.7V To ± 5.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

ADG611/ADG612/ADG613
TERMINOLOGY
V
Most positive power supply potential.
V
Most negative power supply potential.
I
Positive supply current.
I
Negative supply current.
GND
Ground (0 V) reference.
S
Source terminal. Can be an input or output.
D
Drain terminal. Can be an input or output.
IN
Logic control input.
V
Analog voltage on Terminal D and Terminal S.
R
Ohmic resistance between Terminal D and Terminal S.
ΔR
On-resistance match between any two channels, that is,
R
R
Flatness is defined as the difference between the maximum and
minimum value of on resistance as measured over the specified
analog signal range.
I
Source leakage current with the switch off.
I
Drain leakage current with the switch off.
I
Channel leakage current with the switch on.
V
Maximum input voltage for Logic 0.
DD
SS
S(OFF)
D(OFF)
D(ON)
ONMAX
ON
FLAT(ON)
DD
SS
D
INL
ON
(V
, I
S
)
S(ON)
− R
ONMIN
.
Rev. A | Page 10 of 16
V
Minimum input voltage for Logic 1.
I
Input current of the digital input.
C
Off switch source capacitance. Measured with reference
to ground.
C
Off switch drain capacitance. Measured with reference
to ground.
C
On switch capacitance. Measured with reference to ground.
C
Digital input capacitance.
t
Delay between applying the digital control input and the output
switching on (see Figure 17).
t
Delay between applying the digital control input and the output
switching off (see Figure 17).
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Off Isolation
A measure of unwanted signal coupling through an off switch.
Crosstalk
A measure of unwanted signal that is coupled through from one
channel to another as a result of parasitic capacitance.
On Response
Frequency response of the on switch.
Insertion Loss
Loss due to the on resistance of the switch.
ON
OFF
INL
INH
S(OFF)
D(OFF)
D(ON)
IN
, I
INH
, C
S(ON)