MT5634IND-GB/IE Multi-Tech Systems, MT5634IND-GB/IE Datasheet - Page 6

• Manufacturer Part Number: MT5634IND-GB/IE
• Description: MODEM V.92 DATA/FAX EK BUNDLE
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® INDr

Specifications of MT5634IND-GB/IE

• Data Format: V.92
• Baud Rates: -
• Interface: -
• Voltage - Supply: 6 V ~ 48 V
• Mounting Type: Desktop
• Package / Case: 4.3" L x 2.4" W x 0.9" H (110mm x 61mm x 24mm)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 881-1129

Multi-Tech Systems, Inc. MT5634IND Quick Start Guide
Steps for Connecting Your Modem to Your System
Step 3 – Install the Modem Driver
If you use Windows 98+, you must install the modem driver, which is
installed using the Windows Plug and Play feature. Follow the four-step
procedure below. If you use another operating system, see your
operating system manual.
Note for Windows NT
before Step 2. Follow the on-screen directions and select the Multi-Tech
MT5634SMI-V92-IND driver.
6
RS-232 Connection
Phone Line Connection
Power Connection
1.
2.
3.
4.
For AC
For DC
Plug one end of the serial cable into the RS-232 connector on the
modem, and plug the other end into a serial port connector on your
computer, such as COM1 or COM2.
Plug one end of the phone cable into the MT5634IND LINE jack
and the other end into a phone line wall jack.
Plug the power supply cable with attached transformer block into
the power connector on the MultiModem. Then plug the AC cord
receptacle into the transformer block, and plug the other end of the
of the AC cord into a power outlet or power strip.
Note: Use only the power supply supplied with the MT5634IND.
Use of any other power supply will void the warranty and could
damage the modem.
Plug the fused cable into the power connector on the MultiModem.
Then attach the two wires at the other end of the fused cable to a
DC power source.
Make sure your modem is connected properly, and then turn on
Insert the MT5634IND CD, and then click OK.
Windows installs and configures the modem.
Click Finish to exit.
your computer. Windows should detect your new modem and
open the Install New Modem wizard.
–
Windows NT inserts one additional prompt