K70DWN2-V1-F KENTEC ELECTRONICS, K70DWN2-V1-F Datasheet - Page 12

• Manufacturer Part Number: K70DWN2-V1-F
• Description: LCD MODULE, 7", 800X480, TOUCH SCREEN
• Manufacturer: KENTEC ELECTRONICS

Specifications of K70DWN2-V1-F

• Backlighting Color: White
• Lcd Display Type: TFT
• Pixel Pitch (h X W): 0.2327mm X 0.2327mm
• Display Mode: Resistive
• Interface Type: Parallel
• Viewing Area (h X W): 154.08mm X 85.92mm
• Rohs Compliant: Yes

10. Suggestions for using LCD modules
10.1 Handling of LCM
9. Do not alter, modify or change the the shape of the tab on the metal frame.
10. Do not make extra holes on the printed circuit board, modify its shape or change the positions of
6. Install the LCD Module by using the mounting holes. When mounting the LCD module make sure it is
free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the
backlight cable.
8. To prevent destruction of the elements by static electricity, be careful to maintain an optimum work
1. The LCD screen is made of glass. Don't give excessive external shock, or drop from a high place.
2. If the LCD screen is damaged and the liquid crystal leaks out, do not lick and swallow. When the liquid
3. Don't apply excessive force on the surface of the LCM.
4. If the surface is contaminated ,clean it with soft cloth. If the LCM is severely contaminated , use
5. Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by
7. Don’ t disassemble the LCM.
environment.
Isopropyl alcohol/Ethyl alcohol to clean. Other solvents may damage the polarizer . The following
solvents is especially prohibited: water , ketone Aromatic solvents etc.
water droplets, moisture condensation or a current flow in a high-humidity environment.
is attach to your hand, skin, cloth etc, wash it off by using soap and water thoroughly and immediately.
components to be attached.
-
-
-
-
Be sure to ground the body when handling the LCD modules.
Tools required for assembling, such as soldering irons, must be properly grounded.
To reduce the amount of static electricity generated, do not conduct assembling and other work
under dry conditions.
The LCD module is coated with a film to protect the display surface. Exercise care when peeling
off this protective film since static electricity may be generated.
FS-K70DWN2-V1-F
PAGE 12 OF 13
06/Jul 2010