ADG1208YRUZ Analog Devices Inc, ADG1208YRUZ Datasheet - Page 14

• Manufacturer Part Number: ADG1208YRUZ
• Description: IC MULTIPLEXER 8X1 16TSSOP
• Manufacturer: Analog Devices Inc
• Series: iCMOS®r
• Type: Analog Multiplexerr

Specifications of ADG1208YRUZ

• Function: Multiplexer
• Circuit: 1 x 8:1
• On-state Resistance: 270 Ohm
• Voltage Supply Source: Single, Dual Supply
• Voltage - Supply, Single/dual (±): 10.8 V ~ 13.2 V, ±15 V
• Current - Supply: 1µA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 16-TSSOP (0.173", 4.40mm Width)
• No. Of Circuits: 1
• Supply Current: 220µA
• On State Resistance Max: 120ohm
• Supply Voltage Range: 10.8V To 13.2V, ± 13.5V To ± 16.5V
• Operating Temperature Range: -40°C To +125°C
• Package: 16TSSOP
• Maximum On Resistance: 475@12V/200@±15V Ohm
• Maximum Propagation Delay Bus To Bus: 130@±15V|170(Typ)@12V ns
• Maximum High Level Output Current: 30 mA
• Multiplexer Architecture: 8:1
• Maximum Turn-off Time: 100@±15V ns
• Maximum Turn-on Time: 95@±15V ns
• Power Supply Type: Single|Dual
• Multiplexer Configuration: Single 8:1
• Number Of Inputs: 8
• Number Of Outputs: 1
• Number Of Channels: 1
• Analog Switch On Resistance: 475@12V/200@±15VOhm
• Analog Switch Turn On Time: 95ns
• Analog Switch Turn Off Time: 100ns
• Package Type: TSSOP
• Power Supply Requirement: Single/Dual
• Single Supply Voltage (min): 5V
• Single Supply Voltage (typ): 12V
• Single Supply Voltage (max): 16.5V
• Dual Supply Voltage (min): ±5V
• Dual Supply Voltage (typ): ±15V
• Dual Supply Voltage (max): ±16.5V
• Mounting: Surface Mount
• Pin Count: 16
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

ADG1208/ADG1209
TERMINOLOGY
R
Ohmic resistance between D and S.
ΔR
Difference between the R
I
Source leakage current when the switch is off.
I
Drain leakage current when the switch is off.
I
Channel leakage current when the switch is on.
V
Analog voltage on Terminal D, Terminal S.
C
Channel input capacitance for off condition.
C
Channel output capacitance for off condition.
C
On switch capacitance.
C
Digital input capacitance.
t
Delay time between the 50% and 90% points of the digital input
and switch on condition.
t
Delay time between the 50% and 90% points of the digital input
and switch off condition.
S
D
D
ON
OFF
ON
S
D
D
IN
D
, I
(Off)
(Off)
, C
(Off)
ON
(V
(Off)
(EN)
(EN)
S
(On)
S
S
)
(On)
ON
of any two channels.
Rev. B | Page 14 of 20
t
Delay time between the 50% and 90% points of the digital
inputs and the switch on condition when switching from one
address state to another.
T
Off time measured between the 80% point of both switches
when switching from one address state to another.
V
Maximum input voltage for Logic 0.
V
Minimum input voltage for Logic 1.
I
Input current of the digital input.
I
Positive supply current.
I
Negative supply current.
Off Isolation
A measure of unwanted signal coupling through an off channel.
Charge Injection
A measure of the glitch impulse transferred from the digital
input to the analog output during switching.
Bandwidth
The frequency at which the output is attenuated by 3 dB.
On Response
The frequency response of the on switch.
Total Harmonic Distortion + Noise (THD + N)
The ratio of the harmonic amplitude plus noise of the signal to
the fundamental.
TRANSITION
INL
DD
SS
BBM
INL
INH
(I
INH
)