LFE2-50E-6FN484C Lattice, LFE2-50E-6FN484C Datasheet - Page 42

• Manufacturer Part Number: LFE2-50E-6FN484C
• Description: IC FPGA 50KLUTS 339I/O 484-BGA
• Manufacturer: Lattice

Specifications of LFE2-50E-6FN484C

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Lattice Semiconductor
DQSXFER
LatticeECP2/M devices provide a DQSXFER signal to the output buffer to assist it in data transfer to DDR memo-
ries that require DQS strobe be shifted 90
DQSXFER signal runs the span of the data bus.
sysI/O Buffer
Each I/O is associated with a flexible buffer referred to as a sysI/O buffer. These buffers are arranged around the
periphery of the device in groups referred to as banks. The sysI/O buffers allow users to implement the wide variety
of standards that are found in today’s systems including LVCMOS, SSTL, HSTL, LVDS and LVPECL.
sysI/O Buffer Banks
LatticeECP2/M devices have nine sysI/O buffer banks: eight banks for user I/Os arranged two per side. The ninth
sysI/O buffer bank (Bank 8) is located adjacent to Bank 3 and has dedicated/shared I/Os for configuration. When a
shared pin is not used for configuration it is available as a user I/O. Each bank is capable of supporting multiple I/O
standards. Each sysI/O bank has its own I/O supply voltage (V
voltage references, V
two voltage references, V
plies.
In LatticeECP2/M devices, single-ended output buffers and ratioed input buffers (LVTTL, LVCMOS and PCI) are
powered using V
independent of V
Each bank can support up to two separate V
enced input buffers. Some dedicated I/O pins in a bank can be configured to be a reference voltage supply pin.
Each I/O is individually configurable based on the bank’s supply and reference voltages.
CCIO
CCIO
REF1
. LVTTL, LVCMOS33, LVCMOS25 and LVCMOS12 can also be set as fixed threshold inputs
.
REF1
and V
and V
REF2
REF2
, which allow it to be completely independent from the others. Bank 8 shares
, with Bank 3. Figure 2-37 shows the nine banks and their associated sup-
o
. This shifted DQS strobe is generated by the DQSDEL block. The
REF
voltages, V
2-39
REF1
CCIO
and V
). In addition, each bank, except Bank 8, has
LatticeECP2/M Family Data Sheet
REF2
, that set the threshold for the refer-
Architecture