105XBRIRBA24D EDWARDS SIGNALING PRODUCTS, 105XBRIRBA24D Datasheet
105XBRIRBA24D
Manufacturer Part Number
105XBRIRBA24D
Description
40T9927
Manufacturer
EDWARDS SIGNALING PRODUCTS
Datasheet
1.105XBRIRBA120A.pdf
(2 pages)
Specifications of 105XBRIRBA24D
Current Rating
150mA
Flash Rate Per Minute
240
Bulb Diameter
9mm
Length
117mm
Ip/nema Rating
NEMA 4X
Light Source
LED
Chameleon
105XBRi Series XTRA-BRITE
LED Multi-Status Indicator
in NEMA 4X Enclosures
The Edwards 105XBRi Series XTRA-BRITE
reliable UL and cUL listed, multi-color visual signaling device. It features a corrosion resistant
Type 4X enclosure that is UL listed for Marine use, and can be panel or conduit mounted.
The base is manufactured from glass-reinforced thermoplastic polyester resin and the double
fresnel lens is made of shatter resistant polycarbonate.
The lights are available in 24V DC and 120V AC 50/60 Hz, in either Red/Blue/Amber
or Red/Green/Amber.
Edwards Signaling’s NEW 105XBRi Multi-status Indicator
is more “chameleon-like” than ever.
New Adaptive Design: One device does it all
With a quick change to the new 105XBRi Chameleon’s dip switch settings, these flexible multi-status indicators instantly adapt for use with or without control
from an external PLC, PAC, or control relay. Now, regardless of the application, you will have just the right device for the job with only half the inventory.
XTRA-SAFE
The Chameleon 105XBRi devices ship as standard with Edwards Signaling’s XTRA-SAFE
multi-status indicating devices employ patented combinations of color AND flash-rate to provide more definite status indication to those who are color-
blind. With XTRA-SAFE
the urgency that the color red typically connotes. When amber, these devices pulse at a “less urgent” rate of 120 flashes per minute. When Chameleon
multi-status indicators are turned blue or green and no other colors are activated, the Chameleon devices remain “steady-on” and do not flash. Even in
extreme cases where no color is perceived, flash-rate variation provides a redundant layer of visual indication.
When XTRA-SAFE
pre-set flash-rates:
XTRA-SAFE
While in most cases, the added layer of safety gained by operating a multi-status indicator with XTRA-SAFE
applications may not require differentiation in flash rates. In other applications, changes do not correspond to escalating levels of urgency. The
adaptive design of the new Chameleon 105XBRi allows the product to be adapted to accommodate these requirements by a simple dip switch
configuration. With XTRA-SAFE
indicators are turned green or blue and no other colors activated, the Chameleon devices remain “steady on” and do not flash.
When XTRA-SAFE
Externally Controlled
The Chameleon multi-status indicators can also be used in applications where they will be controlled “externally” using a Programmable Logic
Controller (PLC) or other such external controller. When externally controlled by a PLC, activation of colors and flash-rate are fully customizable,
and can be programmatically determined. In applications, where multiple colors are activated simultaneously, the lights operate on a priority with
red highest, amber second and blue or green, the lowest.
The Chameleon has three different configurations for mounting that include the 105BX junction box, the 105BM mounting bracket and the 105PM
pipe mount attachment. The unit can be mounted on ¾" NPT using the 105PM pipe attachment. It can also be surface or wall mounted
using the 105BX junction box, or wall mounted using the 105BX junction box with the 105BM mounting bracket.
All three mounting options are non-conductive plastic fixtures and do not provide earth-ground continuity when attached to metallic wiring systems.
They are intended for use with the 105XBRi Chameleon visual signals only when earth-grounding is not required. They can only be used with
metallic wiring systems when installed at the end of the run.
• Available in 24V DC or 120V AC
• Available in Red/Blue/Amber or Red/Green/Amber
• Three mounting bases: ¾" pipe mount attachment,
• PLC Compatible
• XTRA-SAFE
105XBRi Features
Red: 240 FPM
Amber: 120 FPM
Green or Blue: 65 FPM
outlet box attachment, or wall mounting bracket
for those who are color blind
™
™
™
Enabled
Disabled
Technology enables status indication
™
™
Technology is enabled, and multiple colors are energized, the device will cycle through the energized colors at the following
Technology is disabled, and multiple colors are energized, the device will cycle through the energized colors at 65 FPM.
™
, when Chameleon multi-status indicators are turned red, they pulse at a rate of 240 flashes per minute, further emphasizing
™
Disabled, when red or amber, the unit pulses at a rate of 65 flashes per minute. When Chameleon multi-status
™
™
LED Multi-Status Indicator is a heavy duty,
• Dip switch settings for use with or without external control
• Immune to shock and vibration
• -31°F to 150°F (-35° to 66°C) operating temperature
™
™
Technology (patent pending) Enabled. XTRA-SAFE
™
Technology is desirable, some
Not to be used for installation purposes.
Data Sheet ES001-0113 Issue 1
Page 1 of 2
™
Related parts for 105XBRIRBA24D
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
PUSH BUTTON 821 EDCAN
Manufacturer:
EDWARDS SIGNALING PRODUCTS
Datasheet:
Part Number:
Description:
#6 X 3/4 L TAMPRUFœ ROUNDHEAD
Manufacturer:
EDWARDS SIGNALING PRODUCTS
Part Number:
Description:
,MAGIC CONTACT,OVERHEAD DOOR,F
Manufacturer:
EDWARDS SIGNALING PRODUCTS
Part Number:
Description:
CAST BACK BOX FOR 6 IN/10 IN 340 BELLS
Manufacturer:
EDWARDS SIGNALING PRODUCTS
Part Number:
Description:
TRANSFORMER 120V AC 50/60 HZ PRIMARY, 24V AC 40 VA SECONDARY
Manufacturer:
EDWARDS SIGNALING PRODUCTS
Part Number:
Description:
RARE EARTH STANDARD GAP MAG,(O
Manufacturer:
EDWARDS SIGNALING PRODUCTS
105XBRIRBA24D Summary of contents
Page 1
Chameleon ™ 105XBRi Series XTRA-BRITE LED Multi-Status Indicator in NEMA 4X Enclosures The Edwards 105XBRi Series XTRA-BRITE reliable UL and cUL listed, multi-color visual signaling device. It features a corrosion resistant Type 4X enclosure that is UL listed for Marine ...
Page 2
... Please refer to http://www.philipslumileds.com/pdfs/WP15.pdf. PLC Output to Meet Input Parameter Specifications Cat. No. 105XBRiRGA24D 105XBRiRGA120A 105XBRiRBA24D 105XBRiRBA120A Hazardous Location Ratings Cat. No. 105XBRiRGA24D 105XBRiRGA120A 105XBRiRBA24D 105XBRiRBA120A Dimensional Drawing 4.625" (92mm) 4.375" (111mm) 4.5" (114mm) Agency Approvals Listed for Class I, 1638 & 1604 ...