LK460D3LZ19 Sharp Electronics, LK460D3LZ19 Datasheet - Page 4

• Manufacturer Part Number: LK460D3LZ19
• Manufacturer: Sharp Electronics

Specifications of LK460D3LZ19

• Lead Free Status / Rohs Status: Compliant

1. Application
* These specification sheets are proprietary products of SHARP CORPORATION (“SHARP”) and include materials
* This module is not designed to use in dusty environment and to prevent image retention caused by long-term
* In case of using the device for applications such as control and safety equipment for transportation (aircraft, trains,
* Do not use the device for equipment that requires an extreme level of reliability, such as aerospace applications,
* SHARP assumes no responsibility for any damage resulting from the use of the device that does not comply with
* Contact and consult with a SHARP sales representative for any questions about this device.
2. Overview
composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit, inverter circuit and back light
system etc. Graphics and texts can be displayed on a 1920×RGB×1080 dots panel with 16,777,216 colors by
using LVDS (Low Voltage Differential Signaling) to interface, +12V of DC supply voltages.
technology for the control circuit .In the O/S driving technology, signals are being applied to the Liquid Crystal
according to a pre-fixed process as an image signal of the present frame when a difference is found between image
signal of the previous frame and that of the current frame after comparing them.
result, motion blur reduces and clearer display performance can be realized.
3. Mechanical Specifications
This specification applies to the color 46.0” TFT-LCD module LK460D3LZ19.
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film Transistor). It is
protected under copyright of SHARP. Do not reproduce or cause any third party to reproduce them in any form or
by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP.
telecommunication equipment (trunk lines), nuclear power control equipment and medical or other equipment for
life support.
This module also includes the DC/AC inverter to drive the CCFT. (+24V of DC supply voltage)
And in order to improve the response time of LCD, this module applies the Over Shoot driving (O/S driving)
With these technologies, image signals can be set so that liquid crystal response completes within one frame. As a
display of fixed pattern. So please consider items mentioned above before use and design equipment.
automobiles, etc.), rescue and security equipment and various safety related equipment which require higher
reliability and safety, take into consideration that appropriate measures such as fail-safe functions and redundant
system design should be taken.
the instructions and the precautions specified in these specification sheets.
(*1) Outline dimensions are shown in Fig.1-1, Fig.1-2. (excluding protruding portion)
Display size
Active area
Pixel Format
Pixel pitch
Pixel configuration
Display mode
Unit Outline Dimensions (*1)
Mass
Surface treatment
Parameter
Anti glare, low reflection coating
116.809 （Diagonal）
46.0 （Diagonal）
1018.08(H) x 572.67(V)
1920(H) x 1080(V)
（1pixel = R + G + B dot）
0.53025(H) x 0.53025(V)
R, G, B vertical stripe
Normally black
1083.0(W) x 627.0(H) x 65.7(D)
Hard coating: 2H
Specifications
17.1 ± 0.5
pixel
Unit
inch
mm
mm
mm
cm
kg
LD-18Z32-1