STM32F407VGT6 STMicroelectronics, STM32F407VGT6 Datasheet - Page 20

• Manufacturer Part Number: STM32F407VGT6
• Description: IC MCU 32BIT 1MB FLASH 100LQFP
• Manufacturer: STMicroelectronics

Specifications of STM32F407VGT6

• Core Processor: ARM Cortex-M4
• Core Size: 32-Bit
• Speed: 168MHz
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 82
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 192K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 16x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Core: ARM Cortex M4
• Processor Series: STM32F4
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 168 MHz
• Data Ram Size: 192 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 82
• Number Of Timers: 10
• Operating Supply Voltage: 1.7 V to 3.6 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 12 bit
• A/d Channels Available: 16
• Interface Type: CAN, I2C, I2S, SPI, UART
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-11605

Description
2.2.9
2.2.10
2.2.11
20/154
The DMA can be used with the main peripherals:
●
●
●
●
●
●
●
●
Flexible static memory controller (FSMC)
The FSMC is embedded in the STM32F405xx and STM32F407xx family. It has four Chip
Select outputs supporting the following modes: PCCard/Compact Flash, SRAM, PSRAM,
NOR Flash and NAND Flash.
Functionality overview:
●
●
LCD parallel interface
The FSMC can be configured to interface seamlessly with most graphic LCD controllers. It
supports the Intel 8080 and Motorola 6800 modes, and is flexible enough to adapt to
specific LCD interfaces. This LCD parallel interface capability makes it easy to build cost-
effective graphic applications using LCD modules with embedded controllers or high
performance solutions using external controllers with dedicated acceleration.
Nested vectored interrupt controller (NVIC)
The STM32F405xx and STM32F407xx embed a nested vectored interrupt controller able to
manage 16 priority levels, and handle up to 87 maskable interrupt channels plus the 16
interrupt lines of the Cortex™-M4F.
●
●
●
●
●
●
●
This hardware block provides flexible interrupt management features with minimum interrupt
latency.
External interrupt/event controller (EXTI)
The external interrupt/event controller consists of 23 edge-detector lines used to generate
interrupt/event requests. Each line can be independently configured to select the trigger
event (rising edge, falling edge, both) and can be masked independently. A pending register
maintains the status of the interrupt requests. The EXTI can detect an external line with a
SPI and I
I
USART
General-purpose, basic and advanced-control timers TIMx
DAC
SDIO
Camera interface (DCMI)
ADC.
Write FIFO
Maximum frequency (f
Closely coupled NVIC gives low-latency interrupt processing
Interrupt entry vector table address passed directly to the core
Allows early processing of interrupts
Processing of late arriving, higher-priority interrupts
Support tail chaining
Processor state automatically saved
Interrupt entry restored on interrupt exit with no instruction overhead
2
C
2
S
CLK
Doc ID 022152 Rev 1
) for external access is 60 MHz.
STM32F405xx, STM32F407xx