3-794638-4 TE Connectivity, 3-794638-4 Datasheet - Page 6

• Manufacturer Part Number: 3-794638-4
• Description: Power to the Board HDR ASSY 4 POS 30 AU VERT SMT
• Manufacturer: TE Connectivity

Specifications of 3-794638-4

• Product Type: Plug Housings
• Number Of Positions / Contacts: 4
• Connector Type: Header
• Mount Angle: Vertical
• Mount: Printed Circuit Board
• Pcb Mount Alignment: With
• Product Line: Micro MATE-N-LOK
• Boardlock Plating: Tin
• Smt Holddown Plating: Tin
• Mating Retention Type: Latching
• Smt Holddown Material: Phosphor Bronze
• Voltage (vac): 250
• Current Rating (a): 5
• Termination Method: Solder
• Solder Tail Contact Plating: Matte Tin
• Number Of Positions: 4
• Number Of Rows: 2
• Row-to-row Spacing (mm [in]): 3.00 [0.118]
• Centerline (mm [in]): 3.00 [0.118]
• Pcb Mount Retention Type: SMT Hold Down
• Mating Retention: With
• Contact Type: Pin
• Contact Termination Type: Surface Mount
• Contact Layout: Double-Row
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Brass
• Connector Style: Plug
• Housing Material: High Temperature Nylon
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 1.57 [0.062]
• Lead Free Status / Rohs Status: Details

4.
4.1.
4.2.
4.3.
4.4.
Rev D
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Specimen Selection
Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. All test groups shall each consist of a minimum of 5
specimens.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
108-1836
6 of 7