MAX9311 Maxim Integrated Products, MAX9311 Datasheet
MAX9311
Available stocks
Related parts for MAX9311
MAX9311 Summary of contents
Page 1
... Rev 2; 10/02 1:10 Differential LVPECL/LVECL/HSTL General Description The MAX9311/MAX9313 are low-skew, 1-to-10 differen- tial drivers designed for clock and data distribution. These devices allow selection between two inputs. The selected input is reproduced at 10 differential outputs. The differential inputs can be adapted to accept single- ended inputs by connecting the on-chip V one input as a reference voltage ...
Page 2
Differential LVPECL/LVECL/HSTL Clock and Data Drivers ABSOLUTE MAXIMUM RATINGS ...............................................................................4. CLK_, CLKSEL)..............V Inputs (CLK_, EE CLK_ to CLK_ ....................................................................±3.0V Continuous Output Current .................................................50mA Surge Output Current........................................................100mA V Sink/Source Current ...............................................±0.65mA BB Junction-to-Ambient Thermal Resistance ...
Page 3
Differential LVPECL/LVECL/HSTL DC ELECTRICAL CHARACTERISTICS (continued +2.25V to +3.8V, outputs loaded with 50Ω ± PARAMETER SYMBOL CONDITIONS V BB connected Single-Ended to CLK_ Input Low for V IL ...
Page 4
... 3.0V to 3.8V for the MAX9311 and +25°C. Guaranteed by design and characterization over the full operating temper- A reference 0.15V 0.15V to the smaller IHD ILD -1V -1.5V.) (Note 7) CC ILD CC +25° ...
Page 5
Differential LVPECL/LVECL/HSTL (V = +3.3V 0.95V IHD CC loaded with 50Ω 2V +25°C, unless otherwise noted SUPPLY CURRENT ( vs. ...
Page 6
Differential LVPECL/LVECL/HSTL Clock and Data Drivers PIN NAME 1, 9, 16, Positive Supply Voltage. Bypass from 25, 32 capacitors as close to the device as possible with the smaller value capacitor closest to the device. Clock ...
Page 7
... CC each device into 1.2V results in a minimum BB EE supply of 2.725V for the MAX9311 and 2.58V for the MAX9313. Rounding up to standard supplies gives the single-ended operating supply ranges of V 3.0V to 3.8V for the MAX9311 and V 3.8V for the MAX9313. _______________________________________________________________________________________ Clock and Data Drivers When using the V 0.01µ ...
Page 8
Differential LVPECL/LVECL/HSTL Clock and Data Drivers differential pair by matching the electrical length of the traces. Output Termination Terminate outputs through 50Ω equivalent Thevenin termination. When a single-ended signal is taken from a differential output, terminate both ...
Page 9
Differential LVPECL/LVECL/HSTL V CC 75kΩ CLK0 CLK0 75kΩ 75kΩ 75kΩ CLK1 CLK1 75kΩ 75kΩ CLKSEL V BB _______________________________________________________________________________________ Clock and Data Drivers Functional Diagram ...
Page 10
Differential LVPECL/LVECL/HSTL Clock and Data Drivers (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) 10 ______________________________________________________________________________________ Package Information ...
Page 11
Differential LVPECL/LVECL/HSTL (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.) ______________________________________________________________________________________ Clock and Data Drivers Package Information (continued) 11 ...
Page 12
... Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 2002 Maxim Integrated Products Package Information (continued) Printed USA is a registered trademark of Maxim Integrated Products ...