ATtiny44 Automotive Atmel Corporation, ATtiny44 Automotive Datasheet - Page 16

• Manufacturer Part Number: ATtiny44 Automotive
• Manufacturer: Atmel Corporation

Specifications of ATtiny44 Automotive

• Flash (kbytes): 4 Kbytes
• Pin Count: 14
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 6
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 12
• Ext Interrupts: 12
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 0.25
• Eeprom (bytes): 256
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 125
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 2
• Output Compare Channels: 4
• Input Capture Channels: 1
• Pwm Channels: 4
• 32khz Rtc: No
• Calibrated Rc Oscillator: Yes

6.2.1
16
Atmel ATtiny24/44/84 [Preliminary]
Data Memory Access Times
When using register indirect addressing modes with automatic pre-decrement and post-incre-
ment, the address registers X, Y, and Z are decremented or incremented.
The 32 general purpose working registers, 64 I/O Registers, and 128/256/512 bytes of internal
data SRAM in the Atmel
modes. The Register File is described in
Figure 6-2.
This section describes the general access timing concepts for internal memory access. The
internal data SRAM access is performed in two clk
page
Figure 6-3.
16.
Address
Data Memory Map
On-chip Data SRAM Access Cycles
clk
Data
Data
WR
CPU
RD
®
(128/256/512 x 8)
64 I/O Registers
Data Memory
ATtiny24/44/84 are all accessible through all these addressing
Internal SRAM
Compute Address
32 Registers
T1
Memory Access Instruction
“General Purpose Register File” on page
0x0DF/0x015F/0x025F
0x0000 - 0x001F
0x0020 - 0x005F
0x0060
Address valid
T2
CPU
cycles as described in
Next Instruction
T3
Figure 6-3 on
7701E–AVR–02/11
10.