1-1658016-1 TE Connectivity, 1-1658016-1 Datasheet - Page 5

• Manufacturer Part Number: 1-1658016-1
• Manufacturer: TE Connectivity

Specifications of 1-1658016-1

• Product Type: Connector
• Product Line: MICTOR SB
• Impedance (?): 50
• Solder Tail Contact Plating: Gold over Nickel
• Number Of Positions: 28
• Centerline (mm [in]): 0.80 [0.031]
• Polyamide Film Pad: Without
• Contact Loading Pattern: Differential Load
• Contact Plating, Mating Area, Material: Select Gold
• Contact Material (signal): Phosphor Bronze
• Contact Material (ground): Phosphor Bronze
• Connector Style: Plug
• Housing Color: Black
• Housing Material: Liquid Crystal Polymer (LCP)
• Stack Height (mm [in]): 16.00 [0.630]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Temperature Range (°c): -65 – +125
• Packaging Method: Tray

4.3.
4.4.
Rev B
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Low Level Contact Resistance Measurement Points
Figure 3
108-2139
5 of 5