6-173977-8 TE Connectivity, 6-173977-8 Datasheet - Page 7

• Manufacturer Part Number: 6-173977-8
• Manufacturer: TE Connectivity

Specifications of 6-173977-8

• Product Type: Connector
• Connector Type: Connector Assembly
• Termination Method To Wire/cable: IDC
• Sealed: No
• Ul File Number: E28476
• Csa File Number: LR 7189
• Contact - Rated Current (a): 2
• Operating Voltage Reference: AC/DC, AC, DC
• Operating Voltage (vac): 125
• Operating Voltage (vdc): 125
• Wire/cable Size (awg): 26 – 28
• Profile Height (y-axis) (mm [in]): 5.10 [0.200]
• Number Of Positions: 8
• Number Of Rows: 1
• Centerline (mm [in]): 2.00 [0.079]
• Mating Retention: Without
• Length (x-axis) (mm [in]): 18.00 [0.7087]
• Width (z-axis) (mm [in]): 4.60 [0.181]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Pre-Tin
• Connector Style: Receptacle
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Operating Temperature (°c [°f]): -40 – +105 [-40 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.85 – 1.05 [0.0334 – 0.041]
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Packaging Method: Bag, Box

ASHL-0005- ES REV B
3.8.3 (1)
3.8.3 (2)
3.8.3 (3)
3.8.3 (4)
3.8.3 (5)
3.8.3 (6)
3.8.3 (7)
Para.
Vibration
Sinusoidal
Low Frequency
Physical Shock
Temperature
Life
Resistance to
Cold
Humidity,
Steady State
Thermal Shock
Salt Spray
Test Items
AMP Shanghai Ltd.
Tyco Electronics
No electrical discontinuity greater than 1
microsecond shall occur.
Termination resistance (low level) shall be
met.
No electrical discontinuity greater than 1
microsecond shall occur.
Termination resistance (low level) shall be
met.
Termination resistance (low level) shall be
met.
Termination resistance (low level) shall be
met.
Insulation resistance (Final) 500 MΩ Min.
Termination resistance (low level) shall be
met.
Termination resistance (low level) shall be
met.
Resistance (low level) (Final) must meet
visual & electrical requirements, which
applicable.
Environmental Performance Requirements
Fig. 2 (To be continued)
Requirements
7 of 12
PAGE
Document No.
Subject mated connectors to 10-55-
10 Hz traversed in 1 minute at 1.52
mm amplitude 2 hours each of 3
mutually perpendicular planes.
MIL-STD-202, Method 201,
Condition A.
Subject mated connectors to 490.3
m/s
11milisecond duration; 3 shocks in
each direction applied along the 3
mutually perpendicular planes total
18 shocks.
MIL-STD-202, Method 213,
Condition A.
Subject mated connectors to
temperature life; testing
atmosphere at 85±2
Subject mated connectors to cold
testing atmosphere at -25 ±3
48 hours.
Subsequent measurement shall be
done after reconditioning in the
room temperature for 1 hour.
Subject mated connectors to steady
state humidity at 40
% R.H.
MIL-STD-202, Method 103,
Condition B.
Subject mated connectors to 5
cycles between -55
30 minutes each duration at
temperature extremes.
MIL-STD-202, Method 107,
Condition A.
Subject mated/unmated connectors
to 5% salt concentration for 48
hours.
MIL-STD-202, Method 101,
Condition B.
108-5218
2
halfsine shock pulses of
Procedures
o
o
o
C and 85
C for 96 hours.
C and 90~95
REV
S
o
o
C for
C for
LOC
ES