1551631-5 TE Connectivity, 1551631-5 Datasheet - Page 2

• Manufacturer Part Number: 1551631-5
• Manufacturer: TE Connectivity
• Type: Scalable Pre-Loadedr

Specifications of 1551631-5

• Product Type: Spring Finger
• Application Use Range (mm [in]): 0.65 – 1.1 [0.026 – 0.043]
• Number Of Positions: 1
• Mount Style: Surface Mount
• Uncompressed Height (mm [in]): 1.24 [0.049]
• Width (mm [in]): 1.00 [0.039]
• Preloaded: Yes
• Contact Finish: Gold over Nickel
• Rohs/elv Compliance: Not reviewed for ELV/RoHS compliance
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Packaging Method: Tape & Reel

ASHL-0005- ES REV A
3.5.1
3.5.2
3.5.3
3.5.4
3.5.5
3.5.6
Para.
3. REQUIREMENTS:
3.1.
3.2. Materials:
3.3. Ratings
3.4. Performance and Test Description
3.5. Test Requirements and Procedures Summary
Initial examination of
Product
Final examination of
Product
Low Level Contact
Resistance(LLCR)
Temperature Rise
Normal Force
Durability
requirements specified in Figure 1. Unless otherwise specified, all tests shall be performed
at ambient environmental conditions.
Design and Construction:
Product is designed to meet the electrical, mechanical and environmental performance
Product shall be of the design, construction and physical dimensions specified on the
applicable product drawing.
Material used in the construction of this product shall be as specified on the applicable
product drawing.
A. Voltage: 12 volts AC
B.
C.
TE Connectivity (Shanghai)
Test Items
Current: 0.5A
Temperature: -40 °C to 85 ° C
Meets requirements of
product drawing
Meets visual requirements
Initial: 80 m Æ Max.
Final: R 25 m Æ Max.
30° C Max. under loaded
rating current
Normal Force at nominal
height: 0.60+/-0.2N.
Normal Force at nominal
height: 0.60+/-0.2N.
80 milliohms Max.(Initial)
Mechanical Requirements
Electrical Requirements
Requirements
PAGE NO
2/8
Visual inspection. EIA-364-18.
Visual inspection. EIA-364-18.
Subject mated specimens to 20 mV
Max open circuit at 100 mA DC.
In acc. with IEC 60512-2 test 2a
The voltage / Current should be
applied to the contacts for 1 hours as
below.
Current: 0.7A
Stroke the spring top to the nominal
working height
No. of cycles: 10 cycles.
Stroke the spring top to the nominal
working height
Voltage: 5V D.C
108-115008
Procedures
REV LOC
A2
ES