2007492-2 TE Connectivity, 2007492-2 Datasheet - Page 4

• Manufacturer Part Number: 2007492-2
• Manufacturer: TE Connectivity

Specifications of 2007492-2

• Product Type: Cage
• Termination Type: Press-Fit
• Configuration: 2 x 1
• Pcb Mount: Single Sided
• Termination Post Length (mm [in]): 3.00 [0.118]
• Contact Plating, Mating Area, Material: Gold or Gold Flash over Palladium Nickel
• Contact Base Material: Copper Alloy
• Cage Type: Stacked
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Housing Material: Liquid Crystal Polymer (LCP)
• Cage Material: Nickel Silver
• Emi Containment: External Springs
• Lightpipe: With
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Application: SFP+
• Lightpipe Configuration: Two Per Column (Inner)
• Packaging Method: Tray

Thermal disturbance.
Humidity/temperature cycling.
Temperature life, preconditioning.
Temperature life.
Mixed flowing gas.
Dust.
Rev A
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
See Note.
See Note.
See Note.
See Note.
See Note.
See Note.
Figure 1 (end)
Requirement
Cycle mated specimens between 15
± 3°C and 85 ± 3°C at a maximum
rate of 2°C per minute for 10 cycles.
EIA-364-31, Method III.
Subject mated specimens to 10
cycles (10 days) between 25 and
65°C at 80 to 100% RH.
EIA-364-17, Method A, Test
Condition 4.
Subject specimens mated to blank
transceivers to 105°C for 120 hours.
EIA-364-17, Method A, Test
Condition 4.
Subject specimens mated to blank
transceivers to 105°C for 240 hours.
EIA-364-65, Class IIA (4 gas).
Subject specimens to environmental
Class IIA for 20 days (10 days
unmated followed by 10 days
mated).
EIA-364-91.
Subject unmated specimens to
benign dust contamination for 1
hour.
Procedure
108-2331
4 of 6