184346-1 TE Connectivity, 184346-1 Datasheet - Page 2

• Manufacturer Part Number: 184346-1
• Manufacturer: TE Connectivity

Specifications of 184346-1

• Product Line: Sealed Sensor Connector (SSC)
• Product Type: Connector
• Connector Type: Housing
• Wire/cable Type: Discrete Wire
• Termination Method To Wire/cable: Crimp
• Strain Relief: Without
• Sealed: No
• Mating Retention Type: Latching
• Keying: A
• Panel Mount Retention: Without
• Panel Mount Retention Type: Retainer Clip Slot
• Contact - Rated Current (a): 10 – 17
• Operating Voltage Reference: AC/DC
• Operating Voltage (vac): 125
• Operating Voltage (vdc): 125
• Wire/cable Size (awg): 14 – 20, 18 – 22
• Wire/cable Size (mm²): 0.3 – 1, 0.5 – 2
• Profile Height (y-axis) (mm [in]): 29.49 [1.161]
• Wire Type: Stranded
• Number Of Positions: 4
• Number Of Rows: 2 x 2
• Mating Retention: With
• Length (x-axis) (mm [in]): 36.50 [1.437]
• Width (z-axis) (mm [in]): 19.60 [0.7716]
• Contact Type: Tab
• Circuit Number(s) Blocked: None
• Connector Style: Receptacle
• Housing Material: PBT - GF15
• Housing Color: Black
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Rohs/elv Compliance: ELV compliant
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Rohs/elv Compliance History: Always was ELV compliant
• Ip Dust Sealing Level: 6
• Ip Water Sealing Level: 7, 4
• Agency/standard: SAE/USCAR-2, IEC 529 IP 65/67
• Operating Temperature (°c [°f]): -40 – +125 [-40 – +257]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 1.20 – 2.10 [0.047 – 0.082], 1.20 – 2.70 [0.047 – 0.106]
• Application Use: Wire-to-Wire / Wire-to-Panel
• Contact Transmits (typical Application): Power
• Packaging Method: Carton
• Packaging Quantity: 1000

3.3.
3.4.
3.5.
Rev B
Dry circuit resistance.
Voltage drop.
Isolation resistance.
Vibration, random.
Mechanical shock.
Engaging force
(terminal-terminal).
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions.
Test Requirements and Procedures Summary
Test Description
Voltage: 125 volts AC/DC
Current: See Figure 4 for applicable current carrying capability
Operating Temperature:
•
•
Nylon housings: -40 to 150° C
PBT housings: -40 to 125° C
< 20 milliohms final for crimp and
interface.
10 mV/ampere maximum.
> 20 megohms at 500 volts DC.
No discontinuities > 7 ohms for
more than 1 microsecond.
See Note.
No discontinuities > 7 ohms for
more than 1 microsecond.
See Note.
18 Newtons maximum.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
USCAR 5.3.1. (Rev 4/01)
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
USCAR 5.3.2. (Rev 4/01)
Measure millivolt drop at maximum
rated current.
See Figure 3.
USCAR 5.3.6. (Rev 8/97)
Test between adjacent contacts of
mated specimens.
USCAR 5.4.5. (Rev 4/01)
Subject mated specimens to
vibration profile.
See Figures 5 and 6.
USCAR 5.4.5. (Rev 4/01)
Subject mated specimens to 35 G's
shock pulses of 10 to 20
milliseconds duration. 10 shocks in
each direction applied along 3
mutually perpendicular planes, 60
total shocks.
See Figure 5.
USCAR 5.2.1. (Rev 8/97)
Measure force necessary to
engage virgin contacts and tabs a
distance of 5 mm from point of
initial contact at a rate of 25 mm
per minute. Repeat 9 times and
record maximum force.
Procedure
108-1790
2 of 9