5-846977-5 TE Connectivity, 5-846977-5 Datasheet - Page 4

• Manufacturer Part Number: 5-846977-5
• Manufacturer: TE Connectivity

Specifications of 5-846977-5

• Product Type: Lead Assembly
• Mount Angle: Right Angle
• Cap Material: Glass-Filled Epoxy
• Wire Size (mm² [awg]): 16
• Operating Voltage (kvdc): 25
• Shielded: No
• Lead Assembly Type: J1-21/25 KVDC (LGH 1L) - Double Ended
• Assembly Length (mm [in]): 381.00 [15.000]
• Barrel Depth (mm [in]): 42.93 [1.690]
• Positive Stop Ferrule: Without
• Wire Color: White (Standard)
• Cap Color: Red
• Wire Diameter (mm [in]): 7.11 [0.280]
• Wire Insulation: Silicone
• Preloaded: Yes
• Contact Plating, Mating Area, Material: Tin
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant

3.6.
Rev O2
Barom etric pressure, tem perature
cycling.
Herm etic seal.
NOTE
Product Qualification and Requalification Test Sequence
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
(a)
(b)
(c)
(d)
See paragraph 4.1.A.
Numbers indicate sequence in which tests are performed.
This test group is applicable to hermetic seal type receptacles only.
HiPot is performed at each temperature extreme and reduced barometric pressure,
70000 feet.
Initial exam ination of product
Contact resistance
Insulation resistance
W ithstanding voltage
Vibration
Mechanical shock
Durability
Contact engaging force
Contact separating force
Therm al shock
Hum idity, steady state
Tem perature life
Barom etric pressure, tem perature cycling
Herm etic seal
Final exam ination of product
Test or Exam ination
See Note.
Leakage rate less than 1 X 10 cc
He/sec.
See Note.
Figure 1 (end)
Requirem ent
Figure 2
-8
3,11,15
Test Sequence (b)
13(d)
1,19
5,17
6,18
Test Group (a)
4,8
10
14
12
16
19
1
2
9
7
MIL-STD 202, Method 105C,
Condition C.
MIL-STD 202, Method 112C,
Condition C.
4,13,17
2,12,16
1,18
2(c)
5,9
10
11
15
14
18
3
8
6
7
Procedure
108-36033
4 of 6