3-292292-1 TE Connectivity, 3-292292-1 Datasheet - Page 4

• Manufacturer Part Number: 3-292292-1
• Manufacturer: TE Connectivity

Specifications of 3-292292-1

• Product Type: Connector
• Card Type: 2FF mini SIM
• Card Guide Slots: With
• Pcb Mount Style: Surface Mount
• Contact Retention: Yes
• Connector Stabilization Ribs: Without
• Height Above Pc Board (mm [in]): 1.90 [0.075]
• Card Stop: With
• Ejector Type: Push - Pull
• Centerline (mm [in]): 2.54 [0.100]
• Durability Rating: 5000 Cycles
• Contact Base Material: Phosphor Bronze
• Number Of Contacts: 6
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Housing Material: Thermoplastic - GF
• Card Insertion Style: Normal Insertion
• Card Detection Switch: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Tape & Reel
• Packaging Quantity: 1,000/Reel

ASHL-0005- ES REV A
3.5.11
3.5.12
3.5.13
3.5.14
3.5.15
Para.
Mechanical
Operation 3
See para. 3.6.2
Physical Shock 1
See para. 3.6.2
Physical Shock 2
See para. 3.6.2
Rapid change of
temperature
Dry heat 1
Test Items
AMP Shanghai Ltd.
Tyco Electronics
Sequence Test Group 2
No electrical discontinuity
greater than 1
shall occur.
No physical damage.
No physical damage.
Card shall not be ejected.
Sequence Test Group 1
Sequence Test Group 1
Environmental Requirements
Requirements
Fig. 1 (CONT.)
PAGE NO
second
4
Test shall be conducted using real
cards.
Operation cycles; 750
Rate; 10-cycle/1 minute.
Speed; 10 mm/s
In acc. with IEC 60512-5 test 9a
Slide 0.76mm thick dummy card in
the connector. Subject test frame to
40G half sine shock pluses 6ms
duration.
Endurance; 10shocks in both
directions of 3 mutual
perpendicular axis.
In acc. with IEC 60512-4 test 6c
Slide a real card of 0.76 r 0.08mm
thick in the connector. Subject test
frame to 500G half-sine shock
pluses of 1 ms duration.
Endurance; 2 shocks in both
directions of 3 mutual
perpendicular axis.
In acc. with IEC 60512-4 test 6c
9 40°C / 60 min. , 85°C /60 min.
Making this a cycle, repeat 5
cycles.
Recovery time 2 hours.
Use Au-plated dummy card.
Card thickness; 0.76mm
In acc, with IEC 60068-2-14
70°C, Duration: 16 hrs.
Recovery time; 2 hours
Sample 1 and 2 unmated
Sample 3 and 4 mated:
Use Au-plated dummy card.
Card thickness; 0.76mm
In acc. with IEC 60512-6 Test 11i
108-60031
Procedures
REV LOC
B
ES