STM8TL53G4 STMicroelectronics, STM8TL53G4 Datasheet - Page 35

• Manufacturer Part Number: STM8TL53G4
• Description: 8-bit, ultra-low-power, touch-sensing MCUs with 16-Kbyte Flash and proximity detection
• Manufacturer: STMicroelectronics

Specifications of STM8TL53G4

• Operating Power Supply: 1.65 V to 3.6 V
• Temperature Range: –40 °C to 85 °C
• 4 Low Power Modes: Wait, Active-halt with AWU (1 μA), Active-halt with ProxSense™ (10 μA with scan every 200 ms),Halt (0.4 μA)
• Dynamic Power Consumption: 150 μA/MHz
• Fast Wakeup From Halt Mode: 4.7 μs
• Ultralow Leakage Per I/o: 50 nA

STM8TL53xx
9
9.1
9.1.1
9.1.2
9.1.3
9.1.4
Electrical parameters
Parameter conditions
Unless otherwise specified, all voltages are referred to V
Minimum and maximum values
Unless otherwise specified, the minimum and maximum values are guaranteed in the worst
conditions of ambient temperature, supply voltage and frequencies by tests in production on
100% of the devices with an ambient temperature of T
the selected temperature range).
Data based on characterization results, design simulation and/or technology characteristics
are indicated in the table footnotes and are not tested in production. Based on
characterization, the minimum and maximum values refer to sample tests and represent the
mean value plus or minus three times the standard deviation (mean±3Σ).
Typical values
Unless otherwise specified, typical data are based on T
only as design guidelines and are not tested.
Typical curves
Unless otherwise specified, all typical curves are given only as design guidelines and are
not tested.
Loading capacitor
The loading conditions used for pin parameter measurement are shown in
Figure 6.
Pin loading conditions
Doc ID 022344 Rev 1
50 pF
STM8TL53xx PIN
A
A
= 25 °C and T
SS
= 25 °C, V
.
DD
Electrical parameters
A
= 3 V. They are given
= T
A
Figure
max (given by
6.
35/62