TLE 6263-3G Infineon Technologies, TLE 6263-3G Datasheet - Page 10

• Manufacturer Part Number: TLE 6263-3G
• Manufacturer: Infineon Technologies

Specifications of TLE 6263-3G

• Packages: PG-DSO-28
• Transceiver: Fault-tollerant CAN ISO 11898 - 3
• Voltage Regulator Output: 120 mA
• Watchdog: Window Watchdog
• Quiescent Current (max.): < 85 ?A (5V on)
• Standby Current: < 500 ?A (5V on)

Revision 3.2
Figure 4:
Receive-only Mode
The receive only mode is designed for a special test procedure to check the bus
connections. Figure 5 shows a network consisting of 5 nodes. If the connection between
node 1 and node 3 shall be tested, the nodes 2,4 and 5 are switched into receive only
mode. Node 1 and node 3 are in normal mode. If node 1 sends a message, node 3 is the
only node which can acknowledge the message, the other nodes can only listen but
cannot send an acknowledge bit. If node 1 receives the acknowledge bit from node 3,
the connection is OK.
Figure 5:
CAN Network Example
Testing the Bus Connection in Receive-only Mode
1
RxD1
Transceiver1
Controller 1
2
TxD1
BUS Line
10
RxD2
Transceiver2
5
Controller 2
TxD2
Data Sheet TLE 6263-3G
4
3
2008-11-26